Question about 2000 Isuzu Rodeo

2 Answers

Multiple cylinder misfire - 2000 Isuzu Rodeo

Posted by on

  • chuck brackett
    chuck brackett Feb 10, 2012

    when was the last tuneup? is there a spark plug wire or wires touching metal? how many miles on engine? it may also be a fuel system problem like dirty injectors or a bad filter.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Radmon misfire code 300

Posted on Dec 24, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 5,370 Answers

For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Posted on Feb 19, 2012

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: PO300 Error code Random/Multiple Cylinder Misfire Detected

change the coils but most likely a bad ecu

Posted on Dec 09, 2011

  • 1082 Answers

SOURCE: I HAVE 2002 ISUZU AXIOM

Probably you have a cracked or otherwise bad Distributor Cap. I would have changed the dist. cap and rotor first, and probably the wires too. You said you changed the boots, did that include the wires?

Pay attention to the order of wires before removing from cap. Draw yourself a diagram.
Are you sure you returned the plug wires to correct plug?

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Multiple cylinders misfiring on 2000 hyundai elantra gls


how can you be sure its the cylinders? maybe your spark plugs are worn and need to be changed?

May 08, 2017 | Hyundai Cars & Trucks

1 Answer

I have Codes po300,po303,po303pd toyota 4 runner


P0300 - Random/Multiple Cylinder Misfire Detected or Misfiring Of Multiple Cylinders
P0303 Cylinder 3 Misfire Detected

Sep 13, 2014 | 1997 Toyota 4Runner

3 Answers

What causes 2005 2.5l volvo to misfire and show code random multiple misfires i replaced plugs but no good


I would take it back and demand a refund. Could be the crank or cam sensors, an intake leak, faulty coil, or a list of other components.

Aug 26, 2012 | Volvo S60 Cars & Trucks

1 Answer

When my car is ran on computer is has cose PO300 PD. What does this indicate?


DTC P0300 - Random/Multiple Cylinder Misfire Detected
Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly.

A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-firing, nor why.

Hope this helps.

Oct 03, 2011 | 2004 Chevrolet Malibu

1 Answer

Multiple cylinder misfire


There could be a couple of reasons for this. If you are getting multiple misfires then usually it has something to due with the plugs going bad. It also depends on how many miles you have on the plugs and the wires. The other problem could be with the ignition coils or the ignition module.

Apr 10, 2010 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Engine light on, codes are PO300, PO302, PO305. what do these mean?


These are cylinder misfire codes meaning ;
P-0300 = RANDOM OR MULTIPLE MISFIRE
P-0302 =CYLINDER #2 MISFIRE
P-0305 =CYLINDER #5 MISFIRE
Check spark plugs, wires, and coil(s)

Mar 31, 2010 | 2006 Kia Sorento

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

2 Answers

Obd codes p0300 p0301 p0303 p0305 p0401


P0401 Exhaust Gas Recirculation Insufficient Flow Detected

P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected


I would check out the EGR valve. That maybe what is causing all the misfires.

Mar 24, 2009 | 1997 Toyota Camry

1 Answer

I am workiing on a 1999 toyota carolla has a misfire


Here is a good site for OBD II trouble codes.  P0300: Random/Multiple Cylinder Misfires Detected, P0301: Cylinder 1 Misfire Detected, P0304: Cylinder 4 Misfire Detected.

Jan 25, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

1,299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...