Question about 2004 Toyota Camry
Posted by Anonymous on
This is more of a question than an answer,..but it appears no one seems to know anything about identifying which serpentine belt to use,..there are two listed for the 2004 Toyota Camry 2.4 liter engine. One belt is designed for engines with the "enhancement" and another belt was designed for 2.4 liter engines WITHOUT the "enhancement" My question here is,..How do you know if your 2004 Toyota Camry has this "Enhancement" installed or not.
Posted on Nov 25, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sorry for the delayed response.
CLICK on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 04, 2010
Actually you don't have to do all of that. I just replaced one from the top. On the passenger side of the engine where the belt is, you will see the tensioner in the middle. Using a larger breaker bar with the socket that fits the bolt in the middle of the wheel, force the tensioner toward the front of the car to release pressure to remove the belt. I think it was a 15mm but can't remember for sure. I do know they are all metric sizes on that engine. The tricky part is to remember how the belt is routed. If you forget, see the diagram below. There isn't much room to work, but I'm proof that it is possible. When putting the new best on, route all pulleys and leave the alternator for last since it's right on top and easy to get to. Good luck and be patient. It's doable.
Posted on Apr 12, 2010
Replacing Serpentine belt on a Toyota camry 2003—
Step 1--Examine the belt placement of your Toyota Camry fan belt so that you will remember how to put it back once you have removed it. Refer to the vehicle owner's manual for further information. Locate the pivot bolt on the front passenger side of the engine. Loosen the pivot bolt with a socket wrench.
Step 2--Loosen the adjustment locking bolt that is just below the tensioner pulley with a socket wrench, and then loosen the tensioner pulley to allow the belt to move free.
Step 3--Check the belt for any signs of cracking or irregular wear, so you can fix any problems that may exist with the pulleys. Remove the fan belt from the pulleys on the engine and take it out of the engine compartment.
Step 4--Wrap the new fan belt around each of the pulleys the same way it came out. When you have the belt in place, tighten the tensioner pulley with a socket wrench.
Step 5--Tighten the adjustment locking bolt and the pivot bolt with a socket wrench, and then look over the engine to check that everything is back in place.
Step 6--Turn the vehicle engine on and watch it for a few minutes to verify that everything is operating properly, then turn the engine off.
Please refer to these links for serpentine belt diagrams—
Serpentine belt on a Toyota camry Link 1
Serpentine belt on a Toyota camry Link 2
Please do accept the solution and revert for further assistance.
Posted on Jul 13, 2009
Tips for a great answer:
Jan 27, 2016 | Toyota Cars & Trucks
Jun 15, 2015 | 1998 Toyota Camry
Apr 19, 2011 | 2004 Toyota Camry
Jun 04, 2010 | 2004 Toyota Camry
Feb 22, 2010 | 2004 Toyota Camry
Dec 29, 2009 | 2004 Toyota Camry
Nov 20, 2009 | 2007 Toyota Camry
Jul 27, 2008 | 2003 Toyota Camry
Dec 11, 2016 | 2004 Toyota Camry
4,752 people viewed this question
Usually answered in minutes!