Question about 2007 Dodge Nitro R/T
When i first turn my fog lights on sometimes they will blink then go out. Sometimes only the left fog will turn on and the right fog light will blink and then turn off. Sometimes they will not come on at all. Very seldom will both turn on and stay on.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem on my Chrysler Sebring but it was with the headlights staying on. The lights are on a relay called a "delay relay" of which will allow the lights to stay on for a minute after shutting off the ignition (after using your lights let's say when its dark). This of course helps provide light for you to see to walk to your house, keys, etc. But sometimes these relays stick on and just need to be replaced.
Posted on Dec 28, 2008
SOURCE: dodge nitro fuel cap
You stated "key in and key out", I'm assuming that your car has a locking gas cap. If that's the case, turn the key to the right (clockwise), once the key stops, hold it in the far right position with your right hand, then grab the gas cap with your left hand and turn it clockwise. That should do it. Hope this helps. If I was able to FixYa, please rate my answer. Thanks.
Posted on Feb 23, 2009
replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace
Posted on Jun 26, 2009
The pcm (powertrain control module ) is telling you it has a set code in the memory. Take the car to a parts place like (auto zone ) and have them to run a scam on the pcm for a trouble code. Once you have done that then you will be able to correct the problem. Hope this will help you.
Posted on May 27, 2010
Tips for a great answer:
Aug 09, 2016 | Dodge Cars & Trucks
Mar 18, 2015 | 2007 Dodge Nitro
Feb 07, 2015 | 2007 Dodge Nitro SLT
Jul 16, 2014 | Dodge Nitro Cars & Trucks
Jun 10, 2012 | Dodge Nitro Cars & Trucks
Apr 13, 2012 | 2007 Dodge Nitro R/T
Jan 23, 2011 | 2008 Dodge Nitro
Aug 28, 2009 | 2008 Dodge Nitro
Apr 13, 2009 | 1999 Ford Taurus
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: