Question about Dodge Dakota
Start truck when cold starter will stay engaged even when the key is turned off
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
email@example.com fuel pump is located in the gas tank pop the hood to right of carb or left side look for a black cap that looks like a tire cap it will be on a metal pipe fuel pipe take it of have somebody try to start truck then push the little valve if gas comes out the pump is working if not fuel pump coil i think is mounted left side of motor as you look at it pull coil plug then take some rubber coated needle nose pliers hold near the coil look for blue ark remember this do not hold coil wire with bare hands or bare pliers it will shock you real good my buddy had just a bad coil wire so he got a whole wire set frm autozone they also have a web site autozone,com that will have trouble shooting for your truck let me no what happens
Posted on Feb 21, 2009
It has been a long time since I've replaced one of those. From what I remember you don't have to go through pulling the heater box out. You do need to remove the glove box assembly. Look up under the passenger side of the dash. If you see the bulge of the motor/cover hanging straight down then remove the cover and the motor will be there. If you don't see that then te motor is mounted horizonally. If that is the case then the fresh air door assembly will need to be removed and it is behind that.
Here is a quick check to see if the motor is bad. Thump the bottom of the heater box by the passenger's feet. if the motor comes alive or makes noise then it is bad. Also check the fuse and make sure that it doesn't work on any speed. (the resistor would prevent operation on only one speed or more but generally not all speeds)
Posted on Apr 05, 2009
SOURCE: 2001 dodge dakota crank no start
Just had that problem w/ my 01 Dekota, it was the resistor that used to be mounted on the firewall and easy to get to but that is now mounted low on the back of the engine jammed into a bey tight position. I couldn't get to it myself, so ended up taking it to neighborhood garage. Cost me about $150
Posted on Apr 16, 2009
Tips for a great answer:
Sep 10, 2016 | 2002 Dodge Dakota Club Cab
Nov 05, 2014 | Dodge Dakota Cars & Trucks
Aug 26, 2017 | 2002 Dodge Intrepid
Dec 12, 2010 | 2002 Dodge Caravan
Dec 27, 2009 | 2004 Dodge Ram 1500
Nov 25, 2009 | 1992 Dodge Dakota
Aug 23, 2009 | 2004 Dodge Ram 1500
Aug 22, 2009 | 2002 Dodge Grand Caravan
May 30, 2009 | 2005 Dodge Dakota
May 23, 2018 | Dodge Cars & Trucks
May 22, 2018 | Dodge Journey Cars & Trucks
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: