Question about 2008 BMW 3 Series

Open Question

BMW E90 2008 model 320 i N46 engine 2c24 and 29cc and 29cd fault codes problems solutions

Please help us about the solutions of this troubles. Anyone can send solutions suggestions to this email address.

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 21 Answers

SOURCE: Fuel filter and oil filter location on Bmw 320 td copact

If you removed the camshaft cover, you should probably replace the gasket or at a minimum insure that all bolts are torqued to OEM specification.

Look here for instructions and pictures for the oil change.

The fuel filter is located on the bottom of the car, not sure which side, under a shield. Look here for pics and instructions.

Hope this helps!

Posted on Jun 30, 2009

  • 239 Answers

SOURCE: just bought a bmw 320 d (E90) there is a red light

It means you need have a service inspection.

Posted on Aug 31, 2009

Testimonial: "Is it just an inspection? When I turn on the car it tells me that there is 29000km till next service! Service book was stamped 8000km ago."

  • 5 Answers

SOURCE: bmw e90 fuel


Posted on Jan 15, 2010

  • 277 Answers

SOURCE: bmw 320 or 350i i keep forgetting. year 1983.

I am not for sure, but did not BMW have a heat resistor on the positive side of the coil.
Do you not have a manual.
Hayes online or Canadian Tire or Part Source, maybe NAPA or any place you get parts should have your book and you can see for yourself what you nned.
Good book for any rebuilding

Posted on Jul 25, 2010

  • 1026 Answers

SOURCE: my problem is code for radio casset 525i 1995 my

bmw radio codes ehow .com should find the info there

Posted on Feb 11, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Please help on how to reset the Engine light for the BMW 320i E90,N46 engine

You will need a scan tool that works on that BMW to clear any warning lights such as a check engine light. Unless you have resolved the problem/ fault that has caused the warning light you are wasting your time clearing it as an unresolved fault that has not been fixed will, once you drive the car again, generate the check engine light again together with a bunch of fault codes that can be read by the scan tool.

Apr 20, 2016 | BMW Cars & Trucks

2 Answers

After driving for short distance it won't start I have tried every thing on the book on my BMw 318i m40 1992 model

have you tried having the fault codes reading section of the book
It is the first line of the trouble shooting
it appears that there is an electronic part break down for over heating
it could be in the ignition control module, ECM, coil/s, immobilizer
try exchanging the ECM with a known good one and fix any faults shown on the code scanner

Feb 26, 2016 | BMW Cars & Trucks

1 Answer

Eml came on in my bmw 328i 1999 please how to fix this problem

First thing you need to do is to have the car scanned with a engine malfunction light scanner . then you'll get a engine trouble code.

depending on what is the code then search on google for bmw 328i 1999 engine trouble code list and repair procedures.

to find out what codes meens go to that link

Nov 09, 2015 | BMW Cars & Trucks

2 Answers

How do you reset reset the service light on a Bmw 320, 2008 model

How to Reset the 2006-2011 BMW Maintenance Light …:

May 20, 2015 | BMW 320 Cars & Trucks

1 Answer


WBAVA71058VE31197 is the Vehicle identification number for your car. It is for a BMW car, Series: 3' E90, Body: sedan, Model: 320i, Region: Europe, Production Month: 07/2007, Engine: N46, Steering: left hand drive.

Jan 14, 2011 | BMW M3 Cars & Trucks

2 Answers

Hey I am Muhanad from Iraq I have trouble codes with my BMW E65 745 the codes was variable valve gear and valvetronic actuator motor 2 can you help me please what that mean Best Regards

E90 6-cylinder VALVETRONIC Engine This is a collection of pictures of the new upcoming 6-cylinder engine for the new E90 3 Series from BMW. It is reported to make approximately 258HP @ 6600rpm and 221lb-ft torque at 2500 rpm, a notable upgrade to keep competitive with other vehicles in this class. If the torque peak is really that low in BMW's notoriously flat powerband, it will be really fun to drive. It utilizes a new magnesium-aluminum alloy crankcase shaving off about 22 pounds. It makes 12% more power and consumes 12% less fuel. It will also be seen in the new 630Ci, X3, X5, Z4, and more. There are numerous other upgrades to this moto thanks ben

Nov 16, 2009 | 2007 BMW 7 Series

1 Answer

P1350 trouble code 740i bmw

p1350 trouble code is a misfire code during start on cyclinder 5. this problem could be computer problem or an engine problem. cylinder codes aren't easy d-i-y jobs so the best solution i can think of is taking to to a bmw certified mechanic

Jun 20, 2008 | 2000 BMW 7 Series

Not finding what you are looking for?
2008 BMW 3 Series Logo

Related Topics:

1,317 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides