Question about Cars & Trucks
Problem: Whirlpool Dishwasher DU1100XTPS1: start button has no effect. "Normal" cycle light does not come on when button pressed, but other cycle light do come on when their buttons are pressed. "Start" button does not respond at all, even when one of the responsive cycle lights is lit. "Cancel/Drain" does activate the drain cycle and clears water, but the drain cycle does not turn off automatically; must be turned off manually. Unnecessary details: Some screws around door frame seem to have stripped thru plastic in frame so door torques easily. Second owner of this home, so don't know history. What I've tried: I tried to reset using 'hitemp-heat-hitemp-heat' button press sequence (suggested by Rylee Smith for another posted issue) with no effect. I welcome your suggestions, especially those that are fast/simple/cheap/effective! Thank you!!
This is a problerm caused by the main control circuit board that is behind all the control buttons, the part is about $150.00 and about 1 hour to replace it.
Posted on Feb 10, 2012
Testimonial: "Thanks to Dennis for a quick reply!"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 16, 2013 | 2009 Ford F-150
Apr 27, 2012 | 1996 Subaru Impreza
Aug 02, 2011 | 1997 Mitsubishi Montero
May 03, 2011 | 1999 Dodge Ram
Make sure the trip odometer is NOT on 'Trip A' or 'Trip B' (ie: just the normal
ODO). With the ignition off, press and hold the reset button. Press the 'Start'
button twice without pressing the brake, but while holding the reset button.
The dash will let you know its resetting, just keep holding the button until it
2. Make sure the Trip/Odometer is set to "trip A". With ignition off press and hold the reset button. While pressing the reset button, press the start/ignition button twice to turn ignition on. Keep watching the trip/odometer display to flash the lines (-----) until you see it flash the zeros (00000) then it
Feb 22, 2011 | 2009 Lexus LS 460
Dec 28, 2010 | 2004 Ford Taurus
Dec 27, 2008 | 2008 Toyota Highlander
81 people viewed this question
Usually answered in minutes!