Question about 2004 Ford Mustang V6

1 Answer

Mustang drop down windows to clear roof moulding don't work. any suggestions?

Door windows are supposed to drop down when the handle is first pulled. this allows the window to clear the upper body moulding around the door opening. Driver's door does not work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2004 mustang v6, my windows do not drop when you pull the handle to open the door, and they clear the top just fine. i don't know where you hear they do, i would like to know.

Posted on Mar 16, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 770 Answers

SOURCE: 1998 Ford Explorer XLT 4Lt 4x4 (Right hand

Call a junkyard, if they do not have the car, they can put it on the hotline and find it for you.

Since you are in S Africa, I have proviided a few #;s for you.

800-918-3704
877-259-4015
336-788-9122
336-499-5663

Posted on Oct 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my passenger window don't work ?


If neitrher the driver's door master switch nor the passenger door window switch wont operate the window, and the lock-out button is not on, then likely the passenger door inner panel has to come off to investigate. But first, check the wiring going into the passenger door for a broken wire. Also check the wiring coming out of the driver's door. If you see nothing wrong, pull off the passenger door panel and check for any wires loose from the window switch down to the motor. You can hotwire the window motor with a spare battery set beside the door there, to verify the motor is bad. If it is bad, you have to remove the glass, then remove the window regulator with motor attached, in order to replace the motor.

Nov 14, 2012 | 2004 Ford Mustang

1 Answer

Have a 94 Olds Supreme, I've read the way to fix the door handles (mine are bent not broken, replaced the broken ones last year) but I need to know how to get into the car. Both doors are shut, one...


Get a stiff wire, a coat hanger works, and go in through that opening on window. It will take a little time with bending and twisting to get the wire hooked around inside door handle, but you can certainly do it. Many times I have wished for an open window, when I had to force a door slightly to get a wire through the door rubber moulding. good luck. and keep trying, if you break the seats to get in, you'll still have to replace it.

Oct 06, 2011 | 1994 Oldsmobile Cutlass Supreme

2 Answers

The water leaks into my boot and the left or passenger side inside the car leaving huge puddles of water inside. very unpleasant. also the 2007 MX5 convertable - no leaks in roof or rubbers. help please.


  • If water is getting in from the driver's or passenger's window near the soft top weather-strip, shut the door after closing the window. When putting up the hood, lower the windows while you secure the hood latches & then raise the windows. These actions force the window to contact the weather-strip a bit differently than when the window is closed while the door is closed.
  • There are two common places an MX5 will leak water into the interior - where the top meets the windshield frame- and around the windows where they contact the mouldings. Leaks at the windshield frame are usually caused by dirty or damaged mouldings or the latches not being tight enough. Usually you will notice the top will squeak and rattle if it isn't latched down tight.
  • Wetness in the trunk/boot can be caused by a range of factors. 1. Dried out weather-stripping around the trunk. 2. A cracked rain rail on the convertible top. 3. Dried out weather-stripping around the tail lights.
  • There are three mouldings that fit around the window, and water can leak either between them and the window, or between them and the top. Each of these mouldings is attached to a metal 'track' that is secured to the top frame with two screws. The window moulding that is closest to the windshield header is held on by two screws, the others have nothing holding them.
  • Water can collect in the weather-strips due to small crack or splits along the edge of the hood where it folds after a years of regular top-up top-down use. The only real solution is a new hood.

Sep 08, 2011 | 2007 Mazda MX-5 Miata Touring Convertible

2 Answers

Sunroof stuck open, think the switch maybe bad


I have same problem. Below are a couple of suggestions from LincolnOnLine.com on how to close the sunroof manually. The first relates to a '93 and I'm not sure about the second. Use this info at your own risk. If you get a better answer, PLEASE POST IT HERE FOR ME. Thanks. Mort


Here is the text from my 93 Manual. There is an access panel in the rear centre of the headliner if it is the same as my 93.

Manual Operation

To close the sliding panel manually, remove the roof access hole trim panel located at the rear of the moon roof assembly. Remove the motor and bracket assembly as outlined to expose the splined shaft of the moon roof drive gear box. Using a typical corporate door window regulator crank handle properly set on the splined shaft, crank the moon roof panel closed.

Motor

CAUTION:
It is recommended that the battery ground cable be disconnected when removing or installing the moon roof motor assembly.


Removal and Installation

1. Operate glass panel until rear of glass panel is flush with sheet metal surface.

2. Remove motor access cover.

3. Remove two motor retaining screws.

4. Lower motor away from splined motor gear and disconnect electrical connector.

5. To install, reverse Removal procedure and synchronize motor as outlined under Adjustments.

Good Luck! __________________
Current:<P>1995 Town Car Executive 80K Miles<BR>1990 Mustang LX 2.3 Auto 62K<BR>1985 Chevrolet Caprice Estate Wagon X 2 (160K & 100K)<BR>1983 Chevrolet Caprice Sedan<BR>1984 Renault Turbo Fuego 60K<P>Past<BR> <BR>1980 Oldsmobile Cutlass<BR>1980 Chevrolet Citation<BR>1974 Triumph Spitfire<BR>1968 Triumph Spitfire<BR>1957 MGA<BR>1966 Renault R8<BR>1966 Renault R10<BR>1974 Chevrolet Malibu<BR>1968 Pontiac Firebird<BR>1966 Honda S600 Converible w Hardtop<BR>1978 Bobcat<BR>1969 Buick Last edited by Thanet; January 8th, 2007 at 07:07 PM. #3 post_old.gif January 8th, 2007, 07:26 PM Bill M. user_offline.gif Registered User Join Date: January 8th, 2007 Location: Boston, MA Posts: 3 reputation_pos.gif Moonroof Woes Thanks for the moonroof help. I might be getting a switch in the a.m. If not that remedy doesn't sound too bad. Bill M. #4 post_old.gif January 8th, 2007, 09:49 PM image.php?u=18244&dateline=1141618175 Tman70 user_offline.gif Moderator Join Date: July 26th, 2004 Location: New York Posts: 2,757 reputation_pos.gifreputation_pos.gifreputation_pos.gifreputation_pos.gifreputation_pos.gif 1. Remove the roof headlining access hole cover located at the rear of the roof headlining.

2. Remove the sliding roof panel motor as outlined to expose the splined shaft of the sliding roof rail and guide.

3. Crank theroof sliding outer glass panel closed using a typical corporate door window regulator crank handle properly set on the splined shaft.

4. After performing these operations, remove crank handle and retime as outlined. Refer to «Adjustments, Motor Synchronization (Timing)» .

5. Install the sliding roof panel motor.

6. Tighten to 4-6 N-m (36-53 lb-in) and install roof headlining access hole cover. __________________

Aug 15, 2011 | 1997 Lincoln Town Car

3 Answers

How do you replace an exterior door handle on a 2008 Yukon Denali


u can access thes handles by removing the door panel. u then unhook any cables and wires to the panel and then peel back the noise supressor film and then can u actually see the handles an bolts attaching the handle an a couple of linkage rods attach to it. kind of an easy job....good luck

May 10, 2011 | 2008 GMC Yukon

1 Answer

Is there some way of opening the vw cabriolet when it's icy and not causing any damage. The windows are supposed to go down but because of ice |I'm afraid there's going to be some kind of damage. What does...


There is a wax you can buy to rub around the rubber surround where the door and windows contact. I don't remember where i got my last stick from but I would think a candle would work too.

You are trying to stop the glass/frame sticking together. So, rub wax on them and see if this helps.
The windows are supposed to drop slightly when you pull on the door handle. If they don't, it usually means the window module has lost it's position memory.

Continue to hold the window switch down for 5 seconds after it reaches it's lower limit. Do the same for fully up position....this sets the modules limits memory and windows should drop as handle pulled to open the door..

Jan 09, 2011 | 2004 Volkswagen Beetle

2 Answers

My 2005 mustang is getting wet on the rear and front drivers side only when it rains. What could it be? It doesnt look like its coming from the door. i removed the carpets to see if i see any water but...


you need to unblock your gullies, open bonnet first then follow the ridge on the roof down the side of the front screen into the bonnet, you should see a hole where water escapes, push a thin piece of wire / metal coat hanger down it to clear - do same atthe back, this should solve the problem

Jul 02, 2010 | 2005 Ford Mustang

1 Answer

Window doesn't drop down for door to open on 911 Cab


there should be a sensor on the door handel, so the minute you start pulling the body controll module drops the window through the regulator. an actuator unlocks and locks the door.

May 27, 2009 | 2001 Porsche 911 Carrera

1 Answer

The retractible roof wont retract.


Try locking your trunk lock with the key and try the top again. The top is interlocked with the trunk latch and sometimes locking the ltrunk will clear the troible.

May 24, 2009 | 1995 Audi Cabriolet

1 Answer

Beetle Convertible window problem


My wife's car is a 2004 convertible. We had the same problem. There is a switch built into the door latch assembly. Whenever you pull either the interior or exterior door handle, the switch lowers the door glass a certain amount.

We replaced the door latch assembly and that corrected the problem.

Oct 08, 2008 | 2004 Volkswagen New Beetle Convertible

Not finding what you are looking for?
2004 Ford Mustang V6 Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...