Question about Cars & Trucks

Open Question

Ldv mini bus abs light stays on i have checked the sensors and unplugged the relays under dash and water bottle but still the light wont go out.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tripletauto
  • 1450 Answers

SOURCE: shows ABS fault on dash and ABS light stays on

Check your abs connectors they might have pulled a wire loose

Posted on Nov 11, 2008

emissionwiz
  • 75108 Answers

SOURCE: abs warning light stays on no problems with brakes

The brakes will feel fine until u need the ABS, when the light is on the ABS is disabled. You need to have the ABS system tested for trouble codes, if the light is on there will be a code or codes.

Posted on Nov 14, 2008

csmock132
  • 4669 Answers

SOURCE: 97 Lumina dash warning lights stay on

For the security light you need to replace the ignition lock cylinder or bypass the security system. For the other two, you need to have the car scanned to see what codes are in the ecm and the abs module.

Posted on Mar 19, 2009

  • 116 Answers

SOURCE: Dash board parking brake and ABS lights stay

you have an abs fault. have your abs system scanned for codes.

your base brakes will continue to function normally

Posted on Apr 13, 2009

  • 1 Answer

SOURCE: dash gauges not working

Check the large multi-pin connector in the electronics bay in the engine compartment. The bay is a fairly large black plastic box on the driver's side. Open it and disconnect the largest connector inside (one screw). Spray electrical contact cleaner on the pins and re-mate the connector. This worked on my '99 with the exact same problem. You can find other examples of this with a Google search. It may not solve your problem (could also be a wiring harness problem), but it is incredibly simple and worth a shot.

Posted on May 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Windshield Wiper Fluid Dash Light stays on


replace the sensor in the bottle. you can check for a wiring issue by unplugging the sensor and see if the light goes out. if it doesn't, install a jumper wire in the connector. the float in the bottle is just an on/off switch

Apr 01, 2014 | 2011 Kia Sorento

1 Answer

MY 2000 DODGE NEON ABS DASH LIGHT,AND THE TRAC LIGHT ON THE DASH IS STAYING ON


These two lights work together. The traction control uses the ABS to work. You most likely have a bad wheel speed sensor. Have it scaned with a scan tool under the ABS. Replace which ever sensor it says is open.

Mar 04, 2013 | 2000 Dodge Neon

1 Answer

No bus 5


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 25, 2012 | Cars & Trucks

2 Answers

Tcs,abs,brake lights


you have to have the trouble codes for the abs read. then you can procede to fix the problem.if you can't get axcess to a scanner there is a procedure to retrine flash codes.easier to have it read

Oct 20, 2012 | 2000 Honda Odyssey

1 Answer

Where is the abs fuse on a 2002 ford transit bus


It is under the hood in the fuse and relay center.

May 30, 2012 | Ford Transit Cars & Trucks

2 Answers

Sometimes the abs light will stay on after starting.


I have the ABS light on. I pulled the relay to reset it. the light went out but as soon as I start moving the light comes on. I tested the ABS on a sandy road and it does work. I jacked all wheel off the ground. I rotate each wheel and found the ABS light comes on when rotating the rear left wheel. I removed the rotor to examine the the system. I cleaned it with the brake cleaner I still get the ABS light on after rotating the wheel. Is that the sensor that is bad?

Nov 23, 2010 | 1997 Acura RL

1 Answer

ABS light stays on


ABS light comes on with ignition then should go off when you start the car.
If abs sensor does not turn off after disconnecting the battery, then there is a real problem, a faulty sensor or ABS malfunctioning.
When the ABS led comes on immediately after you start the car and stays on usually is one of the relays.
The main one is called surge arrester relay, if it is faulty usually there have been anovervoltage.
There should be two more, usually located behind the black plastic cover of the ABS.
Testing and changing the faulty relay can fix the problem.

If light turns off on startup, and comes back on when you reach some speed, usually you need to check the wheel sensors. You test them unplugging the sensor located behind the wheel and testing it for continuity with a multimeter.
Use Haynes manual to find locations and specs of relays.
Contact a qualified mechanic if you cannot fix it yourself, problems with ABS may compromise safety of the vehicle

Jun 03, 2010 | 2004 Ford Explorer

1 Answer

Abs light is on


The problem may be that you just have a faulty wheel sensor that is sending false signals to the your on board computer.
You will need to get the ABS computer scanned. Check all fuses first before getting it scanned.

ABS light comes on with ignition then should go off when you start the car.
If abs sensor does not turn off after disconnecting the battery, then there is a real problem, a faulty sensor or ABS malfunctioning.
When the ABS led comes on immediately after you start the car and stays on usually is one of the relays.
The main one is called surge arrester relay, if it is faulty usually there have been anovervoltage.
There should be two more, usually located behind the black plastic cover of the ABS.
Testing and changing the faulty relay can fix the problem.

If light turns off on startup, and comes back on when you reach some speed, usually you need to check the wheel sensors. You test them unplugging the sensor located behind the wheel and testing it for continuity with a multimeter.

Jul 17, 2009 | 2005 Ford Freestar

1 Answer

Brake light on vehicle lit up on dash


check the parking brake sometimes a slight bump can make that light come on... pull it up then disengage it roll the car back and forth and see if it goes out.. 2nd make a heavy salt and water solution and completely drench the brake calipers with it move vehicle back and forth working brake...then spray off immeaditaly with a hose... this should clean up the abs sensors... if ithe light still stays on it may be a malfuction in the cars obds ( on board diagnosis systems..) unpluge positive termianl from your car let it set off for like 3 mins then put it back and start car see if the light stay on after you take it for a drive... if none if these work take to your dealer ship to replace the abs sensors... it wont be cheap....

Good luck.. Hope it fix's'ya!!

May 19, 2009 | 2001 Chevrolet Blazer

1 Answer

Need to find abs plug.. light wont go out


the abs light will always stay on even if you pull abs main fuse ,usually its awheel sensor on frt hubs ,broken wire around upper control arm,you can visually inspect,i will not recomend pulling abs light from dash.

Feb 18, 2009 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...