Question about Honda Cars & Trucks
The new key must be programmed using special procedures you can't do at home, you must alos have at least one working transponder key or the module must be replaced, about a $600 part.
Posted on Feb 09, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To remove that hub you will destroy the bearing. Because you have to remove it with a slide hammer. It is not necessary to remove the hub to change the studs. Remove the caliper, caliper bridge and rotor. Using a hammer simply knock out the stud or studs you want to replace. Put new stud in and using a sleeve that has a bigger diameter than the stud (I use a big nut, like the one on the axle) put big nut over stud and screw lug nut on stud and tighten until head of stud is flush with hub. Re-install rotor, caliper bridge and caliper. Hope this helps.
Posted on May 19, 2009
Tips for a great answer:
Sep 25, 2015 | Honda Cars & Trucks
Oct 19, 2014 | 1998 Honda Prelude
Nov 27, 2010 | 1998 Honda Prelude
May 31, 2010 | 1991 Honda Prelude
Sep 10, 2009 | 1998 Honda Prelude
May 15, 2009 | 1989 Honda Civic
111 people viewed this question
Usually answered in minutes!