Question about 1999 Chrysler Concorde

1 Answer

I have a Chrysler Concorde 2000 LXI I with the Check Engine light on, so I ran it thru the computer scanner and it appears to say Fuel to Rich. What does that mean, and how do I fix it?

Posted by on

  • Jeremy W.
    Jeremy W. Feb 09, 2012

    what was the specific code. It should be a P followed by four numbers P0172 for example.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 17,970 Answers

I agree with the comments posted from Jeremy, you dont have the code number?

A Fuel too Rich code basically means that an oxygen sensor in bank 1 detected a rich condition (too little oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1.

Here you have a description and test procedure: Repair/05/200o8c05/cip0171.pdf

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 09, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 160 Answers

SOURCE: 2002 Chrysler Concorde Lxi

There is a faulty sensor or valve. Sounds like a valve. The best thing to do, is take it somewhere that can diagnose the trouble code. Autozone can I believe, and they can tell you exactly what's going on with it.

Posted on Jul 17, 2009

  • 323 Answers

SOURCE: Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.

That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

Posted on May 07, 2009

polarcycle
  • 1392 Answers

SOURCE: I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340

P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

Posted on May 29, 2009

  • 412 Answers

SOURCE: i have a 2001 chrysler concorde. the trouble codes

I RECOMMEND REPLACING THE OUTPUT SPEED SENSOR..ABOUT 40 BUCKS..WILL CAUSE THESE OTHER FAULT CODES AS WELL

Posted on Aug 31, 2009

  • 1 Answer

SOURCE: I cannot get the alarm to reset on my 1998

using your key u can bypass the alarm by locking or unlocking your door or u can remove the fuse

Posted on Dec 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everything works on my stereo system,but there is no sound


Car Stereo Head Unit Install ** No Sound ** Amp Not ...

? 10:41
https://www.youtube.com/watch?v=wQ9bSdJGMjg
Mar 23, 2014 - Uploaded by PSYCHOTICNORMAN
Video for those who installed their head unit correctly, but got no sound / factory amplifiers not turning on. ... Car Stereo Head Unit Install ** No Sound ** Amp Not Turning On ** work around. ....Did everything to the letter on a 2001 Chrysler Town and Country and while I do have audio, my audio is cutting in ...

Everything works on my stereo system,but there is no sound ...

www.fixya.com/.../t26059653-everything_works_stereo_system_but_no
1 hour ago - everything works on my stereo system,but there is no sound lxi 4cd canger - Chrysler 2001 Concorde question.

Chrysler Concorde radio works but no sound Questions ...

www.fixya.com > ... > Cars & Trucks > Chrysler
Chrysler Concorde cars & trucks radio works but no sound questions and answers. ... Fixya - Solutions for Everything ... My 2002 concord lxi when ... CAR STEREO HAS POWER BUT WILL NOT OPPERRATE ... Question about 2001 Concorde ... ...sound from radio thru speakers Is there any popping when playing a CD or ...

Jan 19, 2016 | 2001 Chrysler Concorde

1 Answer

2000 chrysler concorde lxi 3.2l started with timing belt unaligned


Or worse, if it has bent valves, so yes do check compression. That is an interference engine design.

Mar 17, 2014 | 2000 Chrysler Concorde

2 Answers

I just replaced the actuator on my 2000 Chrysler Concorde LXI and my heater still isn't working. Any other idea's?


If its not blowing air then you may want to try a new blower motor if it is blowing air then you probably need a new thermostat

Jan 23, 2013 | Cars & Trucks

1 Answer

2001 chrysler concorde lxi stalls with no warning when slowing down, starts right back up


You have a check light on

What codes have you retrieved?

What testing has been done?

Dec 07, 2012 | 2001 Chrysler Concorde

1 Answer

Where is fuel pump on 99 Chrysler Concorde lxi 3.2?


Inside the fuel tank

Have to drop or remove the tank
The pump comes out the top

Sep 11, 2012 | Chrysler Concorde Cars & Trucks

1 Answer

I HAVE A 1999 CHRYSLER CONCORDE LXI, CHECK ENGINE LIGHT COMES ON AND RPM RACE TO 4000 WHEN DRIVING 55MPH?


First thing is to have the computer scanned for trouble codes.
My guess would be a torque converter or overdrive problem.

Jun 26, 2012 | 1999 Chrysler Concorde

1 Answer

2000 CHRYSLER LXI 3.2 ENGINE WILL NOT START ENGINE TURNS OVER NO PROBLEM BYT WILL NOT START


Try a basic test first. Get some starting fluid from the part store and spray some in the air cleaner and try to start the car. If it tries to start on this fluid, then you know you have a fuel problem, if not, then it could be a spark or timing issue. Do this test first and post the results and I can help you more.

Jun 05, 2011 | 2000 Chrysler Concorde

1 Answer

I have a 2000 Chrysler Concorde LXi. The check engine light came on while accelerating and at that point the transmission would not shift to the next higher gear. Eventually it did shift and ran normal...


That's telling you that something is wrong and needs to be checked and/or repaired. If you stop at one of the bigger autoparts stores, they will scan it for you for FREE, and let you know what code is coming up. That code should point everyone in the direction of problem. Without retrieving that code, you'll be wasting time and money on guessing. Once they tell you what the code(s) is, they may recommend a part to fix it. If your uncomfortable with that advice, get back to us with that code(s) and we can better advise you . With that said, transmissions now days, are expensive and fly apart pretty easily compared to the transmissions from years back, so I wouldn't advise going any further than a place to have it diagnosed properly first.

Apr 13, 2011 | 2000 Chrysler Concorde

Not finding what you are looking for?
1999 Chrysler Concorde Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...