Question about 2002 Saturn L-Series
Where is the horn located?
Should be behind the drivers side of the front bumper.
Posted on Feb 09, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: flasher/2002 saturn l300
youturn signal flasher is part of the hazzard switch located in the center of the dash above the radio. the trim piece around the radio and the climate controls pops off using a small flat bladed scewdriver.
Posted on Mar 31, 2009
On SL2, the horn is just in
front of the radiator in the middle of the car. It is nautilus shaped,
although it is difficult to see the shell-like shape while it is
'96 would have a built-in relay in the horn; no relay in the junction box.
Hope help with this.
Posted on Mar 18, 2010
Testimonial: "Just the fact that you replied by was very good, although I still can't find the horn. Thanks anyway."
The cooling fan relay should be in the under hood fuse block.Remove the cover and on the back of the cover there should be a label that shows the fuses and relays and what system they protect.Just remove the one that is for the cooing fan and install the new one.Hope this helps.Good luck.
Posted on Mar 22, 2010
You need to start by jacking up the front of the vehicle and putting it on stands. Once this is done, you can remove the wheel in question. After the wheel is off, remove the brake calipers, then the brake pads, then remove the brake rotor. Now on some vehicles, you have to have a certain sized socket to remove the axle nut. If you don't have this proper size, you can rent it from your local Napa store. So then you remove the axle nut and cotter pin if one exists. Remove both of the upper and lower ball joints. Doing this will give you free swing of the spindle arm, which then give you access to remove the axle from it. Once you have the axle out, you can remove the spindle arm, and then you must have the bearings pressed out and the new ones back in by a shop. Typically, they don't charge more than a few dollars a piece to have this done. Anyone with a arbor press can do this.
Otherwise, if you don't want to go through this hassle of removing all of these items and trying to remember where they went. You could always have your mechanic buddy do it for you.
Posted on Oct 01, 2011
Tips for a great answer:
Feb 09, 2016 | 2002 Saturn L-Series
Nov 29, 2015 | 2004 Saturn L300
Apr 26, 2014 | 2004 Saturn L-Series
Jun 30, 2011 | Saturn L300 Cars & Trucks
Apr 02, 2010 | 1998 Saturn SC
Mar 22, 2010 | 2006 Saturn L300
Jul 27, 2009 | 2002 Saturn L-Series
308 people viewed this question
Usually answered in minutes!