Question about 1999 Chrysler LHS

1 Answer

What is it that i need for my 1999 chrysler door to open from the inside but it opens from the outside jus fin

Body 4D weight is 3700

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 4,977 Answers

Sounds like the door release linkage has become disconnected at either the door handle or the door latch.the inner door panel will have to come off to get to the linkage inside the door.with the panel off you will be able to see where the linkage has come off.usually this happens at the door handle(interior).its usually just a broken clip that needs to be replaced.sometimes you can find this when you remove the panel behind or at the interior handle,and might be able to replace the clip without removing the door panel if your adept at working in tight spaces.

Posted on Feb 09, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Chrysler Voyager LX. My non-power sliding door on the passenger side won;t open from the inside. Opens fine form the outside. How do I fix this? Is there a child safety lock I do not see?...


A child safety lock switch hidden away on the trailing edge of the door can be engaged to prevent opening it, will be a little switch of sort itll move up or down. door will open from outside but not inside for child safety,

Jan 06, 2015 | 2001 Chrysler Voyager

1 Answer

How to open car door


You may have an issue with door latch or the door hinges are hanging slightly lower due to weight so try and lift door and then pull or push open if your inside, if its electrical eith switches then check fuses or the unlock/lock relays. Need more information, please let me know.

Sep 07, 2014 | 2010 Kia Venga 1.4

1 Answer

Driver door


The door actuator is bad

Oct 23, 2013 | 2008 Chrysler Sebring

2 Answers

My boot wont open


If the back seat folds down you can get in and take the cover off the boot lid and pull the levers to the lock and it will open. If the seats do not fold down you have to remove the back seats to get into the boot or just get a locksmith

Jan 01, 2013 | Renault Megane Cars & Trucks

2 Answers

Cant get boot to open


Inter through the back seat. If the lock is broken you could unlock from the inside of the trunk.

Oct 29, 2012 | Renault Megane Cars & Trucks

1 Answer

Passenger door will not open from inside


once you ge it open the spray some wd 40 in the latch assembly and work the lever back and forth then try it i bet it works!!!

Jan 15, 2010 | 1991 Chrysler New Yorker

2 Answers

Chrysler passanger door problem...


I had the same problem with my Honda Civic a couple months ago. There could be a problem with the bell crank, the part that keeps the door shut. It could be broken or just not working right, and that's probably why your having problems opening and closing your door. You can take it to your Chrysler dealership or to a paint and body shop to get it repaired.

Aug 25, 2009 | 2000 Chrysler 300M

1 Answer

1999 vw passat tdi 1.8 -back right door doesn't open from outside


it must be dismanteld by specialist. i don't think that you can solve this problem. you will have to change some detail and door will open from outside

Jun 16, 2009 | 1999 Volkswagen Passat

3 Answers

1999 Volkswagen Passat inside inner door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 25, 2009 | 1999 Volkswagen Passat

1 Answer

The Drivers door won't open from the outside or the inside?


does it have electric door locks? maybe there stuck on lock. if thats whats up you will need to get someone thats got a slim jim to unlock it for you. most body shops have one. if anyone would know how to open your door it would them.

Jan 14, 2009 | 1990 Buick LeSabre

Not finding what you are looking for?
1999 Chrysler LHS Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...