Question about 2000 Isuzu Hombre
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.
Posted on Aug 15, 2008
1. Check the connecting rod alignment If either the bend or the twist exceeds the specified limit,the connecting rod must be replaced. Bend per 100 mm (3.937 inch) Limit: 0.15 (0.0059) Twist per 100 mm (3.937 inch) Limit: 0.20 (0.0078)
2. Measure the connecting rod thrust clearance. Use a feeler gauge to measure the thrust clearance at the large end of the connecting rod If the clearance exceeds the specified limit, the connecting rod must be replaced. Standard: 0.16 mm - 0.35 mm (0.0063 inch - 0.0138 inch) Limit: 0.40 mm (0.0157 inch)
3. Measure the oil clearance between the connecting rod and the crankshaft.
Posted on Jun 04, 2009
To adjust wheel bearing torque. Tighten the nut fully until the wheel wont turn then unscrew slightly until the wheel turns freely. Replace the locking plate and its set.
Posted on Nov 17, 2009
Go to: http://www.autozone.com/autozone/ymme/ymmeYear.jsp?_requestid=552857
Here you can select the year, make and model.
I hope this information proves useful and helps you with your intake torque success.
Guru @ Fixya
Posted on Apr 10, 2010
Tips for a great answer:
Sep 08, 2016 | Isuzu Cars & Trucks
Jun 02, 2016 | Isuzu Cars & Trucks
Apr 13, 2016 | 1999 Isuzu Hombre
Dec 30, 2015 | 1990 Isuzu Pickup
Nov 07, 2015 | Cars & Trucks
Oct 10, 2015 | Isuzu Cars & Trucks
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: