Question about 2004 Dodge Ram 1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
P2299-BRAKE PEDAL POSITION / ACCELERATOR PEDAL POSITION INCOMPATIBLE
The PCM recognizes a brake application following the APPS showing a fixed pedal opening. Temporary or permanent. Internally the PCM will reduce throttle opening below driver demand. One trip fault and the code will be set within 5 seconds. ETC light will illuminate, the light will only stay illuminated while DTC is active.
DRIVER PRESSING ACCELERATOR PEDAL, THEN PRESSING BRAKE PEDAL, AND CONTINUES TO HOLD THEM DOWN SIMULTANEOUSLY
STOP LAMP SWITCH
The most likely cause of this DTC is Brake Torquing the engine by pressing the Accelerator pedal and the pressing the Brake Pedal.
Posted on Jul 17, 2008
There should be a diagram under the hood on the fan shroud or radiator support. If not, let me know and I see if I can find one. For the most part, if the pulleys it rides on are grooved, the belt ribs ride on it, it the pulley is smooth, the back side rides on it. From a picture of the alternator I have, from the passenger side coming up, over the alternator, then down and under the belt tensioner (smooth pulley), then up and over A/C compressor, then down and around P/S pump, up and around water pump, down around crankshaft pulley.
Posted on Jun 03, 2009
30,000 mile plugs but it doesn't meen they need replacement I work for chrysler I would wait till about 50 or 60 thousand remeber just because there is not a problem doesn't meen they should not be replace at the recommened intervals. they are considered a wearable item. when you do the plug do the wires. words of advise when doing the ignition wires do ONE WIRE AT A TIME it will save u from a big headache. Good luck.
Posted on Jul 01, 2009
The O2 sensor for Bank 1 is located below left front of transmission, in exhaust. Check diag. below.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.
Posted on Dec 04, 2010
Tips for a great answer:
Jan 07, 2016 | Dodge Cars & Trucks
Feb 17, 2015 | 2004 Dodge Ram 1500
Mar 23, 2014 | 2004 Dodge Ram 1500
Apr 15, 2010 | 1998 Dodge Ram 1500 4WD
Jan 05, 2010 | 2004 Dodge Ram 1500
Jun 10, 2009 | 2004 Dodge Ram 1500
May 28, 2009 | 2004 Dodge Ram 1500
Feb 24, 2009 | 2003 Chrysler PT Cruiser
147 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: