Question about 2006 Ford F 350 Super Duty

Open Question

TBC light come on truck F550

What it mean?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ZJLimited
  • 17970 Answers

SOURCE: Truck displaying "TBC FAULT" while driving. What

It may possibly store DTCs. If not.. PINPOINT TEST H: THE INSTRUMENT CLUSTER DISPLAYS "TBC FAULT"

Test Step Result / Action to Take
H1 CHECK FOR THE PRESENCE OF A TRAILER BRAKE CONTROL (TBC) MODULE AND BRAKE PRESSURE TRANSDUCER
Verify that the vehicle is equipped with a TBC module in the instrument panel and a brake pressure transducer on the master cylinder.
Is the vehicle equipped with a TBC module and a brake pressure transducer?
Yes
GO to H2.

No
If the vehicle has a brake pressure transducer but not a TBC module, INSTALL a TBC module. CLEAR the DTCs. REPEAT the self-test.

- If the vehicle has a TBC module but does not have a brake pressure transducer, GO to H4 .

- If the vehicle has neither a TBC module nor a brake pressure transducer, GO to H3 .

H2 CHECK TBC MODULE COMMUNICATIONS
Using the scan tool, access the TBC module. Does the scan tool communicate with the TBC module?
Yes
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

No
Go To Pinpoint Test a.

H3 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.

Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a trailer brake retrofit kit. CLEAR the DTCs. REPEAT the self-test.

No
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

H4 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.
Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a brake pressure transducer. Make sure to LUBRICATE the O-ring seal with clean, specified brake fluid before installation. RECONFIGURE the instrument cluster for trailer brakes, REFER to Programmable Parameters in this section. CLEAR the DTCs. REPEAT the self-test.

No
REMOVE the TBC module and install the storage bin.

Hope this helps; keep us updated.

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dome light fuse..??


The BCM - body control module controls those lights ! There are two fuse's in the rear fuse box that supply B+ voltage to the BCM for interior light's. TBC 3 an TBC 4. Fuse # 4 an #40 both are 10amp fuse's . Fuse Block - Rear
Beneath the left rear seat !

Sep 14, 2016 | 2004 Chevrolet TrailBlazer

1 Answer

Trying to locate the tail light fuse for a Ford F550 Super Duty


Hi Anonymous.

The manuals are a bit cryptic using something so straight-forward as 'Tail Light'. The 2010 F550 manual
http://www.forddieseltrucks.net/manuals/2010-f550-manual.pdf has a big list of fuses and relays starting on PDF page 306. If the year si wrong, (I don't imagine the fuses change all that much year on year, a bigger listing is at
Free Ford F550 Manuals
I hope this will narrow it down for you!

Good Luck
D

Nov 19, 2015 | Ford Cars & Trucks

1 Answer

Tbc dash light meaning for honda


Hello,
I don't know of a TBC light for Honda but there is a TDC... If that's what you meant to type. Its the "Top Dead Center" sensor

The TDC (top dead center) positioning sensor is another name for your crankshaft position sensor. This sensor measures the position of your crankshaft and helps with the proper firing of your spark plugs when you start your engine. The TDC sensor on the '97 Honda Accord is located on the underside of the engine block. Replacement TDC sensors can be purchased at your Honda dealership. This is not a difficult repair and can be done in about 15 minutes.

Read more : http://www.ehow.com/how_7918547_replace-sensor-1997-honda-accord.html

I hope that helps.... Have a great weekend

Sep 27, 2015 | 1994 Honda Prelude

1 Answer

Which fuse is for dash lights 04 envoy


The instrument panel cluster lights are powered by a bus from the body control module but the BCM, in turn, receives power through 10A TBC 2 FUSE 7 and 10A TBC 5 FUSE 32 in the rear fuse block.

Mar 04, 2015 | 2004 GMC Envoy

2 Answers

What is tcb on fuse box diagram Yukon 2003 Yukon


I think you mean TBC,,..
Trailer Brake Control ...

Jul 19, 2014 | Cars & Trucks

1 Answer

Truck displaying "TBC FAULT" while driving. What


It may possibly store DTCs. If not.. PINPOINT TEST H: THE INSTRUMENT CLUSTER DISPLAYS "TBC FAULT"

Test Step Result / Action to Take
H1 CHECK FOR THE PRESENCE OF A TRAILER BRAKE CONTROL (TBC) MODULE AND BRAKE PRESSURE TRANSDUCER
Verify that the vehicle is equipped with a TBC module in the instrument panel and a brake pressure transducer on the master cylinder.
Is the vehicle equipped with a TBC module and a brake pressure transducer?
Yes
GO to H2.

No
If the vehicle has a brake pressure transducer but not a TBC module, INSTALL a TBC module. CLEAR the DTCs. REPEAT the self-test.

- If the vehicle has a TBC module but does not have a brake pressure transducer, GO to H4 .

- If the vehicle has neither a TBC module nor a brake pressure transducer, GO to H3 .

H2 CHECK TBC MODULE COMMUNICATIONS
Using the scan tool, access the TBC module. Does the scan tool communicate with the TBC module?
Yes
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

No
Go To Pinpoint Test a.

H3 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.

Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a trailer brake retrofit kit. CLEAR the DTCs. REPEAT the self-test.

No
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

H4 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.
Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a brake pressure transducer. Make sure to LUBRICATE the O-ring seal with clean, specified brake fluid before installation. RECONFIGURE the instrument cluster for trailer brakes, REFER to Programmable Parameters in this section. CLEAR the DTCs. REPEAT the self-test.

No
REMOVE the TBC module and install the storage bin.

Hope this helps; keep us updated.

Jan 17, 2011 | 2007 Ford Super Duty King Ranch

2 Answers

What does tbc fault mean on a 2006 f350


TBC means Trailer Brake Controller fault.Check for moisture/water in the trailer plug connector at the back of your truck. Water/moisture will cause TBC error codes. Look for moisture at all connections to the plug and inside the plug.Trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code. ----- It means either A) you have a bad ground on your trailer. Or B) your cable on your trailer is too short and causing it to pull out of the plug or C) you have a short in the factory trailer harness wiring or the plug is gunked up. --------- get this possibilities checked.It will help.Thanks.Helpmech.

Dec 24, 2010 | 2006 Ford F 350 Super Duty

2 Answers

What is a tbc fault on a 2006 ford f350 6.0


That is your trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code.

Feb 02, 2010 | 2006 Ford F 350 Super Duty

1 Answer

What's on TBC 2B fuse?


incorrectly wired radio would cause problem.it would be the wire that is suppose to connect for dimming lights looks like a ground but is not has a yellow or a white stripe with black on it.use it as a ground and it will blow the fuse.

Feb 06, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...