Question about 1997 Chevrolet Camaro

1 Answer

Body kit how do I install the bumper cover

Posted by on

  • paul erickson
    paul erickson May 11, 2010

    there are many different styles

    is yours a direct bolt on?

    if so from the new one you should be able top see all the mounting holes to remove existing bolts and screws



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

As the above posted said look on the replacement one and figure out the bolt locations from there.

Posted on Nov 28, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Installing the new Maps on 2015 Murano. It is asking for the activation key and says it was in the kit. I don't see a number anywhere. Do you know were this is found?

go to your local dealer ship. may still be covered under Nissan warrante, since the car is 2015. 3 years, 36000 miles bumper to bumper.

Aug 19, 2017 | Nissan Murano Cars & Trucks

1 Answer

Remove rear bumper from 2012 Dodge Journey

Randall, remove all screw,clips,fasteners securing bumper and then any wiring harness plugs etc. attached to bumper. This is some times a 2 person job, to prevent damage to the bumper, especially when installing. A V-pry tool may be required to remove plastic fasteners easily. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2012 Dodge Journey Crew V6 3 6 Bumper Components Diagram

Removing Plastic Auto Body Fasteners

How to Paint and Install Plastic Bumper Cover Spray Paint

Jun 12, 2016 | Dodge Journey Cars & Trucks

1 Answer

How do you remove and replace front bumper on 2006 Chevy HHR?

I will assume you mean just the bumper cover, not the actual bumper. Most cars today have these held on with large plastic "pop-rivets" which require a special tool to install them. The old rivets are drilled out. One some, you may be able to use carriage bolts to install, but sometimes a friendly body shop will let you borrow the tool.

Feb 20, 2016 | Cars & Trucks

1 Answer

I need to replace the rear fog light cover in the bumper of a 2006 grand cherokee. Do I need to take the bumper off to do so?

FSM 101 or the parts list. shows this.
the parts list show 2 types.
one in the main lamp. ID 7 in drawing
then the optional bumper fog kit, rear.
so bumper. but since its and option, its not that well covered.
not in fsm i bet. did you look.?
so here is my best guess.
the kit shows NO SCREWS.
so just pry's off
see it here.

or im wrong and you must gain inside access
to trip the plastic locking lever on lamp.
as you see the lens is not SOLD.

Mar 31, 2014 | 2006 Jeep Grand Cherokee

1 Answer

How to r & r front bumper on a 2001 mercedes ml320

you have a painted numer cover over the bumper that must be removed, before you can access the bumper and remove it, remove all attaching hardware that attaches the bumper>reinstall and align front bumper install bumper cover and align, and paint as neccessary, I wouldtake it to a body shop and have it repaired if you have not done this repair before as you may find misalignment and seized hardware.

Mar 22, 2012 | Cars & Trucks

1 Answer

I need to know how the plates are called that hold the back bumper in place on the far sides of the bumper.the bumper is held on on the top and on the bottom directly but the sides are held to the body...

the rear bumper is attached with "Brackets", however, the real bumper is a steel bar, inside the bumper "cover". The bumper cover is a plastic cover that is visible outside and painted. I am not sure to which you are referring. Maybe your best bet would be to stop by a auto body repair facility and have them write you a free estimate for repair. That would list the parts needed. From there you can find the name of the part you are looking for and order it yourself.
If this was helpful please give it a thumbs up to help others.

May 31, 2011 | Suzuki Vitara Cars & Trucks

1 Answer

My headlights want fit now that i have the front bumper of my drift body kit on what can i do?

The bumper kit is designed to be modified, by either cutting or adding to. If you lights don't fit then you will need to modify the bumper kit and remove any materials that are in the way of the headlights.
A cutoff wheel or even a dremel tool can be used, but take you time and measure twice and cut once or you will have to learn how to mix fiberglass to fix you boo boo.

Jul 29, 2010 | Mitsubishi Eclipse Cars & Trucks

2 Answers

Need step by step instructions on how to remove a rear bumper cover on a 2007 nissan altima

Rear Bumper: Service and Repair
Removal and Installation
1. Remove the LH and RH rear combination lamps.
2. Remove both the rear wheels and tires.
3. Remove the LH and RH splash shields.
4. Remove the rear bumper fascia clips and screws, then remove the rear bumper fascia.
5. Remove the rear energy absorbing foam.
6. Remove the rear bumper reinforcement.
7. Remove the rear bumper supports.
Installation is in the reverse order of removal.


Nov 12, 2009 | 2007 Nissan Altima 3.5 Sedan

2 Answers

Chevrolet Cavalier Bumper

Headlight and parking lights are different

97 cavalier:

2001 cavalier:

Only way it would work is to do the 01 conversion by switching the whole doghouse (fenders, hood, bumper, lights, etc.) It can be done though.

Mar 27, 2009 | 2001 Chevrolet Cavalier

1 Answer


What do you mean by "extension" - a lip spoiler maybe, to go under the chin of the car? If that's what you want, and you have the RS4 kit, check out - they have some killer parts. Also (if you're in Europe) check out - huge array of aftermarket body parts but the shipping to the US is a killer.

Aug 01, 2008 | 2002 Audi A4

Not finding what you are looking for?
1997 Chevrolet Camaro Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides