Question about 2004 Chevrolet Impala

Open Question

2004 impala abs/traction control - 2004 Chevrolet Impala

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tripletauto
  • 1450 Answers

SOURCE: 2005 Impala abs & traction control problem

The traction control works off of the abs.So when abs has problem traction is disabled. If problem started when brakes changed most likely one of these sensors. Check rear wiring and see if you can see any physical damage.

Posted on Nov 11, 2008

Ad
  • 37 Answers

SOURCE: 2001 impala abs brakes light comes on only when you go thru water

The traction control system uses the abs wheel sensors to detect wheel speed if the abs light is on the entire abs system will disable giving you regular braking but it will also stop feeding info to the traction control

Posted on Dec 06, 2008

  • 462 Answers

SOURCE: Impala - trac off and ABS light along with service traction syst

THE PROBLEM IS WITH A HUB WHEEL SPEED SENSOR OR MORE LIKELY THE HARNESS LEADING TO THE HUB.

CHECK THE RESISTANCE AT THE HUB CONNECTION, IT SHOULD BE BETWEEN 900OHMS AND 1300OHMS. THEN SWITCH TO A-C VOLTAGE, IT SHOULD BE 100MV WHEN TURNING THE WHEEL BY HAND. IF BOTH CHECK OUT THE PROBLEM IS IN THE WIRING TO THE HUB.

THE RIGHT FRONT HUB USUALLY HAS A BEND, DOWNWARD THEN UPWARD NEAR THE CONNECTOR TO THE HUB. THAT IS WHERE THE PROBLEM USUALLY OCCURS.

NEW HARNESS WIRES CAN BE BOUGHT AT THE DEALER.

Posted on Jun 18, 2009

  • 454 Answers

SOURCE: My 03 Chevy impala's ABS and traction control

Get your brakes checked ASAP.

Posted on Oct 07, 2009

daves944
  • 1050 Answers

SOURCE: 2005 impala ls the abs light and the traction control light comes

You'll need to have the codes read from the computer. You will have a code that indicates one of the front wheel sensors is bad. This could be the case, but they are very expensive as they are built into the wheel bearing assemblies. It is more likely that the wiring harness between the frame and the part of the front spindle that holds the harness, has broken internally. It is a very common problem and can be repaired with a new wiring harness section or by tracking down the fault and repairing it.

Posted on May 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

02 impala gas mileage between 10-13. Abs/ traction control lights on... ac also blows only cool on passenger side. Hot on driver side... already tried charging worked only for a few minutes. ..HELP


Abs and traction control work with each other. You have a fault in one of the system need to get scanned.The a/c have a blockage in system or maybe a leak. The gas mileage probably has to do with abs/traction control

Apr 30, 2015 | 2002 Chevrolet Impala

1 Answer

On my 2004 chevy impala the traction control abs warning lights come on and stay on .


If the ABS has failed, there will not be any traction control since the latter is dependent on it.

You could have failed or damaged wheel sensors.

Mar 14, 2015 | 2004 Chevrolet Impala

1 Answer

Traction control and abs warning light comes on,how do I fix??


the ABS system is defective, probably one or more of the sensors.

Traction control system works with the ABS sensors to monitor to monitor traction slippage.

Jul 20, 2014 | 2001 Chevrolet Impala

1 Answer

Abs traction control light comes on and the car wants to stall


ABS & traction control are controlled by the ECU(engine control unit).It's all integrated by the CAN(Controller Area Network) bus.-----------------------------------------------------------------------------
Trucks & Heavy Duty Scan Tools

Dec 04, 2012 | 2004 Chevrolet Impala

1 Answer

I have a 2002 chevy impala ls 3.8 V6 automatic transmission with traction control problems, when its cold and you start the car a let it run for about 20 min sometimes when taking off the traction control...


front hubs will affect the traction control, it uses the abs sensor but usually it will turn on the abs light, traction control light and s e s lights

Dec 17, 2010 | 2004 Chevrolet Impala

1 Answer

Service traction & abs


What you will have to do is get the codes from the electronic control module to see what is causing the problem.What happens when the lights go on is the module sees a fault and turns the light on.You will have regular braking when the light is on but you will not have abs or traction control.So you need to get the codes first to diagnose the problem.Hope this helps.Good luck.

Feb 22, 2010 | 2004 Chevrolet Impala

1 Answer

Have a 2004 Chevy Impala recently purchased used.


sounds like you have a wheel hub out causing the lights to come on. odds are it would be the front left. it's not sensing right causing the traction control to be turned on. or it could be a loose wire for that hub. gm cars has had a problem with these two issues.

Nov 15, 2009 | 2003 Chevrolet Impala

3 Answers

Both abs and traction control light stays on also spedo not working have checked all related fuses all ok have tried to scan with both snapon solus and launch x431 niether will communicate with abs ecu but...


had my 2000 chev impala 3.8 liter ,traction control llight and abs light both go on the reset it and go right back on .so i replaced both sides of the bearing hub assembly this is connected the senser,so far so good.replaced it dec 21 2009 about 3 hours ago. because the assembly came appart when took off.

Oct 30, 2009 | 1997 Acura CL

1 Answer

Service traction system and ABS light


verify all tire pressures are correct this can affect abs traction control on your vehicle

May 31, 2009 | 2003 Chevrolet Impala

2 Answers

2001 impala abs brakes light comes on only when you go thru water


The traction control system uses the abs wheel sensors to detect wheel speed if the abs light is on the entire abs system will disable giving you regular braking but it will also stop feeding info to the traction control

Dec 04, 2008 | 2002 Chevrolet Impala

Not finding what you are looking for?
2004 Chevrolet Impala Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...