Question about 2004 Chevrolet Aveo
Engine diagram, engine starter
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you may be able to access one for your car on line try www.edmonds.com you can also call scharm auto and truck part to see if they can help you in getting another one for your car like the one you had they sell only GM-parts and maybe able to help you.
Posted on Apr 13, 2009
SOURCE: 2004 chevy aveo that the
P0128 - the thermostat may be stuck open or has anyone
put a colder thermostat in the car,because once it starts to get cold
it will throw a SES with a colder then stock thermostat. Replace the Thermostat should fix this problem.
PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has been removed from the PCM the vehicles main computer , and basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light. To get at the TCM codes requires in most cases the most up to date scanner software purchased after the cars model year and as of yet is still a little iffy. Standard OBD11 scanners will generally not be able to see these codes.
P1781 is set during engine start up when the ECM & TCM do not communicate properly during initial power up. It will only illuminate the service light if the condition occurs in 2 consecutive start cycles, but the DTC will be stored in the failure records after the first cycle.
Replace the Thermostat and go to a transmission shop that can read the DTC codes with a scanner and reset the ECM for clear the codes. Most Transmission shop will do that free of charge, if not turn the Ignition key's to the on position and and pull the ECM fuse out for 30 seconds and then place it back in. Turn the ignition keys to the off position for 10 seconds and then start the car, the engine may stall but let it. Just start the engine again, the ECM is just relearning the engine and go for a test drive. This will clear all the DTC history in the ECM like the day it cam off the assembly line. Good luck and keep me posted, be glad to answer ay more question.
Posted on Oct 30, 2009
SOURCE: 2004 chevy aveo
There is only 2 options.
1. Your radio code is in your paperwork for your car (Its on a hard plastic card) Find it.
2. Take your registration to Vin and Ser Number for your radio to your local dealer.
These codes are a guarded secret and no one code fits all.
Hope this tip helps guide you in the correct direction to solve this problem.
Posted on Apr 11, 2010
Testimonial: "as your information was very helpful but I dont have the paperwork or card and dealer want $75.00 to fix problem. thanks very muvh."
SOURCE: serpentine belt diagram for 2004
Follow this link, page #123, Diagram #5-57. Good Luck.
Posted on Sep 28, 2010
Tips for a great answer:
Feb 19, 2017 | 2004 Chevrolet Aveo
Dec 31, 2016 | 2004 Chevrolet Aveo
Aug 16, 2012 | 2007 Toyota 4Runner
Jul 16, 2011 | 2004 Chevrolet Aveo
May 11, 2011 | 2004 Chevrolet Aveo
Jan 07, 2011 | 2005 Chevrolet Aveo
Mar 25, 2010 | 2004 Chevrolet Aveo
Jan 16, 2010 | 2004 Chevrolet Aveo
Sep 24, 2009 | 2004 Chevrolet Aveo
Jul 04, 2009 | 2004 Chevrolet Aveo
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: