Question about 1993 Cadillac DeVille
How to remove the front drivers seat
There are 4 bolts that hold the seat to the floor.remove the bolts first as you will have to move the power seat to get to some of the bolts.then look for and disconnect all the electrical connectors that go from the floor to the seat.then remove the seat from the car.you may have to turn the seat or get it into a position to remove it from the car for clearance.
Posted on Feb 09, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First do you have a sterring wheel puller. Can't remove the steering wheel without one. Quite an involved job including snaking the electrical connector end through the steering column. I wouldn't recommend it to the novice
Posted on Mar 29, 2009
There is always some way to get to the screws. So if they are not obvious you need to look for circles that can pop off with a screw driver or hidden places like under the handle or in the side pocket or even the outter edge when you open the door.
Posted on Sep 07, 2009
If it is the same as the Cadillac Seville, simply grab the front of the seat with both hands underneath and pull straight upwards, this releases the spring clips, no bolts or screws to remove.
Posted on Sep 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Posted on Dec 07, 2009
Testimonial: "Thanks for your assistance. Great information"
Tips for a great answer:
Oct 13, 2011 | 1996 Cadillac DeVille
Jan 06, 2011 | 1996 Cadillac DeVille
Aug 07, 2010 | 1994 Cadillac DeVille
Apr 12, 2010 | 2001 Cadillac DeVille
Nov 10, 2009 | 1995 Cadillac DeVille
Sep 20, 2009 | 1993 Cadillac DeVille
Sep 14, 2009 | 2001 Cadillac DeVille
May 27, 2009 | 1994 Cadillac DeVille
Dec 19, 2008 | 1998 Cadillac DeVille
317 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: