Question about Mercury Tracer
Anti theft light blinks and the truck will not start.
The anti-theft has been activated and needs to be reset.you may have to get it to a shop that has the tools to do this or go to the dealer to get it done.did you use a key that was cut as a spare and doesn`t have a chip in it.this usually can cause this.also if the wires at the switch break it can activate the anti-theft system.
Posted on Feb 09, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On a 2003 Chevy Maibu the theft system light comes on and blinks when the system is triggered. The car will not start and the fuel pump cuts out. You must turn key to on and have all doors closed. Keep the key to on for 10 mins til theft light turns solid and then disappears. Then turn key to start and it should fire up.
Posted on Aug 07, 2010
you need to call a lock smith guy most of they have the machine to do it. or call arrown to se what shop has a ford scan tool
it has to be a scan tool only to do fords.
Posted on May 28, 2008
Either you may be using a key that you had copied from the original or your chip went bad in your original key. Most of cars now a days have the key censor in the key so if it is the incorrect key it will not start your car or if it does not read that chip it will not start
Posted on Feb 05, 2009
Tips for a great answer:
Oct 09, 2014 | 2001 Mazda Tribute
Jul 09, 2014 | 2006 Ford Fusion
Jan 11, 2013 | 2000 Ford Mustang
Jul 29, 2012 | 2003 Cadillac CTS
Jul 26, 2012 | Ford Cars & Trucks
Jun 14, 2012 | Mercury Grand Marquis Cars & Trucks
Nov 02, 2011 | 2003 Ford Expedition
1,973 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: