Question about 1997 Mercury Grand Marquis

Open Question

Remove dash in 97 Mercury Marquis - 1997 Mercury Grand Marquis

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tneubauer
  • 437 Answers

SOURCE: how is the instrument panel removed from the dash of a 97 mercury cougar problem

1997 Thunderbird/Cougar Instrument Cluster Removal

  1. Disconnect battery ground cable (14301).
  1. Remove retaining screws and instrument panel reinforcement (017A28).
  1. Remove retaining screws and instrument panel lower shield (045G02).
  1. Make sure air bag system is properly disarmed. Remove fasteners holding steering column. Gently lower steering column.
  1. Remove screws holding the instrument panel finish panel (044D70) and gently pry off.


    Instrument Panel Finish Panel

  1. Remove four instrument cluster retaining screws. (Do not remove screws from the instrument cluster main lens (10887) and instrument cluster mask (10890)).
  1. Slide the instrument cluster (10849) to the right of the instrument panel opening and disconnect the instrument panel harness from the back of the instrument cluster.
  1. Remove the instrument cluster from the instrument panel (04320).

1997 Thunderbird/Cougar Installation
  1. Follow removal procedure in reverse order.
  1. Tighten instrument cluster retaining screws to 2-3 Nm (18-27 lb-in).

Posted on Jun 01, 2009

Ad
  • 82 Answers

SOURCE: Is there a relearn procedure for blend doors in a

probably has a bad belend air door motor, to run the systen completely through its self diagnosis process" if has electronic auto temp control"
press."off "and "floor" at the same time release... then hit the "auto" button
wait til gives you code...... it will then "SOMETIMES start WORK normal til moved again by you.....
if manual, change hot to cold, listen carefully for clicking ...if clicking rplave blend door motor and inspect the plenums door while motor out

Posted on Jan 20, 2010

  • 733 Answers

SOURCE: is it difficult to replace the heater core in a 97

It's time consuming. you have to drop the whole dashboard and steering colum in order to get to the heater core. In a scale of 1-10 with 10 being the hardest, i say it's an 8.

Posted on Feb 08, 2010

SOURCE: how do you change an idler pulley on a 97 mercury

Using either a serpentine belt tool or a long ratchet and a socket on the tensioner pulley bolt, turn the tensioner to relieve tension and pop the belt off. Remove the idler pulley bolt and replace the idler pulley. To finish it up simply reinstall the belt.

Posted on Feb 12, 2010

  • 564 Answers

SOURCE: how to replace starter +1993 Mercury Grand Marquis

disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,

Posted on May 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While driving my cockpit lights goes out. Causing a blank dashboard. Vehicle does not stop when this happens. I pull over and turn off engine and then the dashboard lights come back on.


Mercury Grand Marquis Questions - why am i have no lights ...

www.cargurus.com > Questions > Mercury > Grand Marquis
CarGurusDec 31, 2014 - why am i have no lights on my dash - I only have the parking lightsthat ... My 2002 Grand Marquis' brake light on the dash comes on when I ...

Mercury Grand Marquis Questions - What fuses effect ALL ...

www.cargurus.com > Questions > Mercury > Grand Marquis
CarGurusFeb 12, 2014 - No dash lights ,no turn signals, no headlights, no brake lights, no stop lights,no dash lights, no 4 ... 2002 Mercury Grand Marquis LS Premium.

Nov 04, 2015 | 2002 Mercury Grand Marquis

1 Answer

How do I remove the top dash cap, not the whole dash, from a 1993 Mercury Grand Marquis


I covered one of mine with a custom dash mat...about $50. from JC Whitney...on line...much cheaper...leather is not usually used on top side of dash due to Sun rays...

Aug 05, 2015 | 1993 Mercury Grand Marquis

1 Answer

I need a step by step diagram for the dash removal on a 99 mercury marquis


there's not much in the way diagrams of this
but there many dash removal videos online
this wont be easy at all .

Mar 13, 2015 | 1999 Mercury Grand Marquis

1 Answer

Dashboard removabe 93 grand marquis


Long and laborious...About 40 screws and bolts.

Screws and bolts are found on the side of the dash, and under the dash. Keep removing them until you find the next binding point, and remove another fastener. Eventually you will remove them all...

Jan 26, 2014 | 1993 Mercury Grand Marquis

1 Answer

Any tips to removing the starter bolts (3 hole type) on a 1997 mercury grand marquis


use flex joints and extension bars to get back to a place where you can use a ratchet or bar

Nov 08, 2017 | 1997 Mercury Grand Marquis

1 Answer

Dash removal on 1006 mercury grand marquis


Hello, to remove the dash follow this steps:

1. Pry all the woods pieces off of by pulling them away from the dash.

2. Use two ford radio removal tools to remove the radio in the marquis. Place one tools inside two of the four holes in the front of the radio, and the other tools in the other two holes,Pull them away from each other and out of the dash board. Disconnect the wiring harness from the back of the stereo.

3. Remove the screw surrounding the radio using a Phillip head screwdriver. Do not forget to remove the two on the other side of the radio.

4. Remove all the screw around the instrument cluster using a Phillip head screwdriver.

5. Use the steering wheel tilt level to tilt the steering wheel all the way down .

6. Gently pry out the dash , making sure to disconnect the two wiring harness behind the dash board panel before pulling it out completely.

Thanks

Aug 24, 2010 | 2003 Mercury Grand Marquis

1 Answer

How do you change an idler pulley on a 97 mercury grand marquis


Using either a serpentine belt tool or a long ratchet and a socket on the tensioner pulley bolt, turn the tensioner to relieve tension and pop the belt off. Remove the idler pulley bolt and replace the idler pulley. To finish it up simply reinstall the belt.

Feb 12, 2010 | 1997 Mercury Grand Marquis

1 Answer

I'm looking for a site i can go on and get the plan's on how to remove my door pannels on a 97 grand marquis


http://www.autoclinix.com/Mercury/Front%20Speakers.html

in this tutorial u can also know how tto remove door panel.

May 07, 2009 | 2002 Mercury Grand Marquis

3 Answers

Turn signal don't work or the flashers?


If you still have flasher problems, I read on Google to spray WD-40 down in and around the hazzard flasher button, then press it up and down several times...and BINGO...all flashers and signals worked again....just had some dirt and dust in the wiring....

Jan 24, 2009 | 1997 Mercury Grand Marquis

Not finding what you are looking for?
1997 Mercury Grand Marquis Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

fordexpert

Level 3 Expert

5530 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...