Question about 2002 Mazda Millenia
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i want to know how
Fuel filter is located in the trunk.
1. Relieve fuel pressure
First start up the car in PARK. Open up the hood and pull the Fuel Pump Relay. It looks like a big green fuse. Do this as the car runs. Do not worry the car will stale. Crank engine a few times and turn off ignition switch. Put the relay back in. Disconnect negative battery cable.
2. Reach filter.
This is annoying unless you can fit comfortably in the trunk. Pull out the carpet cover and you will see a metal cover screwed down by 3 screws. Remove these and you will see the fuel filter.
Lay down some shop towels underneith the hoses connected at both ends of the filter as fuel will spill out. What I did was place forceps on each hose to minimize spillage. This is also why we releive fuel pressure so it doesn;t spray in your face. Hoses may be stuck onto filter so I took a very small flathead screwdriver and wedge it between the the hose and the filter nozzels so it will free itself from the filter. Becarful as the fuel filter is filled with fuel. Replace filter and follow your steps back.
Posted on Jul 31, 2008
The fuel filter is accessable from inside the trunk. remove the trunk carpet mat. You will notice a circular panel on the left side which is held to the trunk floor with two screws. remove the screws and panel and you will immediately see the fuel filter. When replacing the fuel filter, note the direction of fuel flow and Do Not Install The New Fuel Filter Backwards!
Posted on Dec 21, 2008
JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..
Posted on Mar 11, 2009
Tips for a great answer:
Apr 26, 2013 | 2000 Mazda Millenia
Jan 28, 2013 | Cars & Trucks
Sep 09, 2012 | 1997 Mazda Millenia
Aug 04, 2011 | 2000 Mazda Millenia
Oct 17, 2010 | 2001 Mazda 626
Mar 11, 2009 | 2002 Mazda Millenia
Sep 12, 2008 | 2000 Mazda Millenia
Aug 04, 2008 | 1999 Mazda Millenia
150 people viewed this question
Usually answered in minutes!