Question about 2002 Ford Taurus

Open Question

Blocked transmission vent 2004 taurus - 2002 Ford Taurus

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: transmission fluid port - cannot find for Taurus 2004

You add transmission fluid through the dipstick opening for the transmission... you need a long neck funnel to do so.. they make a transmission fluid funel that you can get. Be careful not to over fill!

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Taurus transmission blows fluid out of the filler tube. Vent was clean


how much fluid did you put in. sounds to be over filled

Dec 06, 2012 | Cars & Trucks

3 Answers

Transmission oil coming out the funnel


If you mean it is coming out of the fill/dipstick tube, then quit driving this car. You will trash the transmission, if it hasn't already happened. Usually when this happens the transmission cooler inside the radiator has busted, and is pumping coolant into the transmission. Then again I have seen some people just overfill it to the extreme. But either way it needs to be checked. This involves dropping the transmission oil pan.

Aug 08, 2011 | 2002 Ford Taurus

1 Answer

2004 ford taraus transmission burps fluid after turning off car


Hi, welcome to FixYa.com my name is Shawn and I will be answering your question.

FORD: 2000-2007 Taurus
2000-2003 Windstar
2004-2007 Freestar MERCURY: 2000-2005 Sable
2004-2007 Monterey
This article supersedes TSB 05-14-5 to update the Service Procedure and vehicle model years. ISSUE: Some 2000-2007 Taurus, 2000-2005 Sable, 2000-2003 Windstar, and 2004-2007 Freestar/Monterey vehicles, equipped with a 4F50N, AX4N, or AX4S transaxle, may exhibit an erratic fluid level reading on the transaxle dipstick and possible leaks around the filler tube and grommet. The condition may be due to a restricted transaxle vent.
ACTION: Repair the transaxle vent restriction by replacing the transaxle vent with a 90° vent stem, small hose clamp, two (2) tie raps, and 24" (61 cm) of 5/16" (8 mm) vacuum hose. The 5/16" (8 mm) vacuum hose will be routed from the 90° vent on the transaxle back to the cowl area, next to the brake master cylinder and tie rapped in place with the end of the hose facing down. Refer to the following Service Procedures.
NOTE: ON WINDSTAR, FREESTAR AND MONTEREY SEAL THE COWL PANEL GRILLE (COWL TOP VENT PANEL) AREA, SEE TSB 06-14-10. NOTE: LEAKS MAY BE MISDIAGNOSED AS COMING FROM THE PAN GASKET. ALWAYS FOLLOW WORKSHOP MANUAL, SECTION 307-01 TO LOCATE THE SOURCE OF A LEAK, AND LEAK CHECK WITH BLACK LIGHT AND DYE. SERVICE PROCEDURE
  1. Disconnect the mass air flow (MAF) sensor electrical connector.
  2. Disconnect the crankcase vent tube(s) from the air cleaner outlet pipe.
  3. Loosen the clamp and disconnect the air cleaner outlet pipe from the throttle body.
  4. Release the air cleaner housing clamp(s).
  5. Separate the air cleaner cover from the air cleaner tray.
  6. Windstar, Freestar and Monterey only: Remove cowl panel grille by following the procedure in TSB 06-14-10.
  7. Disconnect the shift cable if located over the top of the vent.
  8. Remove the vent, pull straight up on the vent with locking pliers, or carefully pry the vent from the transaxle case.
  9. Install the replacement 90° vent stem.
    • Windstar, Freestar, Monterey, Taurus, and Sable with column shifter - Must face to the right rear of the vehicle with the flat edge of vent base parallel to the chain cover boss (Figure 1)
    • Taurus and Sable with floor shifter - Must face to the rear of the vehicle with the flat edge of vent base parallel to the chain cover boss (Figure 2)


    tb8635a.gif
    Figure 1 - Article 06-18-13



    tb8636a.gif
    Figure 2 - Article 06-18-13

  10. Install one end of a 24" (61 cm) long piece of 5/16" (8 mm) vacuum hose to the 90° vent stem and secure with a small hose clamp.
  11. Route the vacuum hose back and up to the cowl area and down next to the brake master cylinder. Carefully tie rap the hose in place next to the brake master cylinder (do not tie rap to brake lines), be sure the end of the hose is facing down and not directly above anything hot.
    • Windstar, Freestar, and Monterey (Figure 3, 4, and 5)
    • Taurus and Sable with column shifter (Figure 6)
    • Taurus with floor shifter (Figure 7)


    tb8637a.gif
    Figure 3 - Article 06-18-13



    tb8638a.gif
    Figure 4 - Article 06-18-13



    tb8639a.gif
    Figure 5 - Article 06-18-13



    tb8640a.gif
    Figure 6 - Article 06-18-13



    tb8641a.gif
    Figure 7 - Article 06-18-13

  12. Connect the shift cable, if removed.
  13. Install the air cleaner cover and outlet pipe. NOTE: USE THE ALIGNMENT NOTCHES TO CORRECTLY ALIGN THE AIR CLEANER COVER TO THE AIR CLEANER TRAY.
  14. Install the air cleaner housing clamp(s).
  15. Connect the air cleaner outlet pipe to the throttle body and tighten to 35 lb-in (4 N-m).
  16. Connect the crankcase vent tube to the air cleaner outlet pipe.
  17. Connect the MAF sensor electrical connector.
  18. Windstar, Freestar, and Monterey only, follow TSB 06-14-10 to seal and install the cowl panel grille.

PART NUMBER PART NAME 1C3Z-7034-AA Vent

I hope my assistance helped you and resolved your concern, if you need further assistance please ask.

Aug 07, 2011 | 2004 Ford Taurus

1 Answer

Transmission stops pulling in drive when i stop at a red light but moves again when i accelerate


Need a whole new transmission, ASAP. It's a 2004 Taurus; Their transmission's tend to start slipping after so many years.

Apr 19, 2011 | 2004 Ford Taurus

2 Answers

I have a 2000 ford taurus with Transmission Fluid coming out of the dip stick. can i fix this myself or do i have to take it in?


There is a transmission vent tube on top of the transmission, & when the vent tube sticks shut, it causes trans fluid to come out of the dipstick (path of least resistance), and/or, the trans pan gasket. This is a common issue w/ the 2000 Taurus. To resolve puncture the trans vent tube.

Dec 04, 2010 | 2000 Ford Taurus

1 Answer

The transmission in my 2004 taurus went out all at once what could be the possible cause


Check the fluid level first.

The torque converter could have failed. But, the transmission should be checked out at a transmission repair shop to be sure.

Nov 03, 2010 | 2004 Ford Taurus

1 Answer

Wont take any trans fluid and when it does it blows it back out


Check the transmission vent. It may be pluged up and needs to be replaced.

Oct 16, 2009 | 2004 Ford Taurus

1 Answer

2004 ford taurus. Its not overheating but there


Did you recently have a transmission fixed?
If so it sound like the drive plate bolts were not applied with Loctite.
Maybe a oil viscosity problem if not a transmission job.

Jun 16, 2009 | 2004 Ford Taurus

1 Answer

Transmission fluid port - cannot find for Taurus 2004


You add transmission fluid through the dipstick opening for the transmission... you need a long neck funnel to do so.. they make a transmission fluid funel that you can get. Be careful not to over fill!

Dec 19, 2008 | 2004 Ford Taurus

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...