Question about 2005 Mercury Montego

Open Question

Oil pressure low light on, and turn signal on dash dont work on the dash but everything ok

Posted by on

  • Pete Feb 08, 2012

    told at dealership that it was thGEM modle?

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

csmock132
  • 4669 Answers

SOURCE: low oil pressure

Is this when the engine is running? If yes, then replace the oil pressure sending unit. If no, it is normal, there won't be any oil pressure if the engine isn't running.

Posted on Apr 10, 2010

  • 12 Answers

SOURCE: occasionally my abs light goes on while driving---

The Anti Lock Brake System on a Mercury should store a trouble code that can be read with special equipment to let you know what the system is seeing wrong that caused the light to stay on. This code is usually stored for up to a week even when the light is not on.
It is possible that a low tire is causing the ABS system to think one of the tires is spinning too fast while braking and set the light. A low tire has to spin a little faster to keep up with the rest, which can appear to the computer as an anti lock brake situation or even an error. The correct tire pressure is listed on a sticker in the drivers door jamb.

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there a oil safety switch on 2002 Chevy s10 zr2


You have a oil pressure switch which is located by the oil filter,it is screwed into block,just removed electrical connector,get wrench and remove.
  • When the oil pressure is either high or low it will either turn the oil light "on" in the dash or move the gauge to the extremes
  • Undetected high or low oil pressure can result in internal engine damage and/or gasket leakage. Here's a picture of what it look's like.
http://www.autozone.com/external-engine/oil-pressure-switch/duralast-oil-pressure-switch/chevrolet/s10-p-u-2wd/2002/6-cylinders-w-4-3l-sfi/31135_652060_8450

Aug 10, 2015 | Cars & Trucks

1 Answer

06 chrysler 300. When I'm at a red light, the oil check on the dash appears then a ding sound. I notice the car idles roughly amd when the light turns green and I start driving the car is fine


Ok what is wrong is your idling is to low which is controlled but a ( Throttle Position Sensor Switch) buy one of these and your problems will be gone, The ding you hear is low oil pressure warning going off once the idling goes back up the oil pressure goes back to being good.

Apr 19, 2015 | 2006 Chrysler 300

2 Answers

Location of oil sending unit on 1990 ranger 2.9


Here's a link to your oil pressure switch,here's the part.As you can see there are 2 types,one for light and one for gauge.
  • When the oil pressure is either high or low it will either turn the oil light "on" in the dash or move the gauge to the extremes
  • Undetected high or low oil pressure can result in internal engine damage and/or gasket leakage

Apr 17, 2013 | Cars & Trucks

3 Answers

Adjust idle


previously answered

Aug 03, 2012 | 2005 Suzuki Forenza

1 Answer

All dash warning lights come on and the temperature and tach needles drop to zero when the headlights are turned on.


Symptoms point to the cluster microprocessor. How was it proven? See diagram below.

c3933a0e-96fc-4737-982a-4d5825950ff8.gif

Jun 16, 2017 | 1997 Pontiac Sunfire

1 Answer

Hello . i bought a used 2001 saturn s series. everything was fine , the car doesnt nstart.the battery light is on the dash board p[lus "service engine soon and oil pressure light.i already changed...


First thing you need to inspect the battery.The battery warning light is coming,due to battery is low on charge or battery got weak.If the battery is low on charge then get it recharged.But if battery is very old,then get it replaced.The battery and turn signal problem are two different problems.
Turn signals not working are due to faulty hazard switch/Turn signal switch,or faulty flasher unit.But in some cases its due to faulty turn signal fuse located in the interior fuse panel.This possibilities needs to be checked.Keep updated for further help.Thanks.Helpmech.

Jan 05, 2012 | 2002 Saturn L-Series

5 Answers

Whats the purpose of an oil pressure switch can it determine weather oil leaks from your grand prix or not?


The oil pressure switch or sending unit is a unit that receives an electrical signal showing what your cars oil pressure is.And yes it does partially does let you know when there is a problem somewhere in the oil system.For example if your filter gets clogged up your oil pressure will go down and then go up when you accelerate.If there was a leak in the system first you would probably see the leak And if the oil pump or oil pump shaft were to break you would have no oil pressure.So you can see the importance of having an oil pressure switch.I feel there are 2 guages that are important to watch are your oil guage and water temp guage they can tell you allot about how your car is operating.

Feb 09, 2011 | 1997 Pontiac Grand Prix

2 Answers

I have a 1999 Beetle and When I'm driving My dash beeps like 10 beeps in a row and the inside lights come on but nothing so up on the dash to tell me the problem


Ok, so are you saying NO LIGHTS come on to tell you what issue is on the dash? The beeping you hear is a low oil pressure warning beep. Its telling you that you are either low on oil or that the oil pump is not delivering oil properly to the motor (car is sensing low oil pressure but on these cars there is no oil pressure gauge on dash to look at). Check your oil level and make sure you are not low. Best time is in morning on flat surface start car and let run 5 minutes. Stop car, let sit 5 minutes and then pull dipstick and check level. Also make sure you are using the correct oil and viscosity for this motor. VW's require VW certified oil and a certain viscosity. You can go to www.mobil1.com to find the correct oil available in the states for your vehicle. Too thin or too thick a viscosity could cause similar issue. Otherwise please clarify the light comment as I have never heard of the lights coming on automatically after a beeping noise and I will research.

Jun 05, 2010 | Volkswagen New Beetle Cars & Trucks

1 Answer

My 1984 camaro turn signal lights dont blink but are lit. Also, when i turn my lights on, my tachometer, oil pressure and temperature gauge stop working.


The turn signals use a small relay for the flash, it's located in the interior fuse panel under the dash (small metal/plastic can)...it's the only thing in the fuse panel that's not a fuse.

They're a few dollars at Autozone and easy to replace.

The short/overload killing the dash gauges will be a bit harder to troubleshoot...Do the gauges die with the parking lights, or only after the switch is all the way out to headlights?

Apr 01, 2010 | 1984 Chevrolet Camaro

Not finding what you are looking for?
2005 Mercury Montego Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...