Question about 1998 Mercury Sable
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 2 fuses and a relay involved in this circuit but the lines that run power to the pump run partially exposed under the vehicle as well. Check the Interior Fuse, check the Fuse in the box under the hood and check to make sure you have voltage at the fuse under the hood. If these are good check for voltage on the wires going to the fuel pump at the fuel pump itself. You can do this with a multimeter and thumb tack. Use the thumb tack to puncture the insulation in the wires and test for voltage. If you don't have voltage there, start working your way back 12" at a time until you find the point where you have voltage to isolate the area of the break.
Posted on Nov 28, 2009
its under the hood on driver side what the problem not starting check the trunk area for the fuel cut off switch poss bad or tripped did u get hit or someone bump ur car
Posted on Mar 28, 2010
Just by turning the ignition on should turn on the fuel pump to send pressure through the fuel system. There may be a fuel pump testing terminal to test with a 12 volt charge.
Posted on Sep 22, 2010
Tips for a great answer:
Oct 31, 2014 | 1995 Mercury Sable
Dec 30, 2012 | 2005 Mercury Sable GS
Jan 22, 2011 | 2004 Mercury Sable
Sep 22, 2010 | 1988 Mercury Sable
Mar 28, 2010 | 1998 Mercury Sable
Jul 16, 2009 | 1997 Mercury Sable
Jun 11, 2009 | 1998 Mercury Sable
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: