- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I just replaced mine and had the same problem. If you look at the new one, you should find a small hole at the base of the metal tube. Using a mirror, I located the same hole in the one in the valve cover and inserted a pointed awl into it and was able to pry it out. Do it slowly since you are prying against plastic. When inserting the new one, I found that it should not be inserted as far the original one was and has a gentle snap.
Look for a large rubber tube attached to the manifold port located on the top left side (passenger) rising up and and then curving down to the rear valve cover pcv port. It is a squeeze, but work the hose off the pcv port, and "voila" the pcv valve is INSIDE the port. Pull it out with its attached grommet. Do not attempt to clean. Replace, only, and save the receipt for the engine warranty. This engine can burn oil if it is a valve seal or manifold plenum problem.