Question about 2002 Kia Sportage
I need to know where the location of the computer on a 2002 kia sportage so i can put a knock seneor on it
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
after you remove all the screws from the dash you have to get down to a section by the pedals and remove something like the airbag to get at the last part of the dash apart. then you need to unplug the mirror and back wiper switches (opt i think). then you have access to your radio. These are all things i gathered from watching the guy at futureshop do, it was about $100 and now I don't have fm radio. but I am now going to try it on my own.
Posted on Oct 23, 2008
Even though the fuel filter and pump are easy to replace, I would start with the IAC sensor first. It is easier to get to and is cheaper than the other two if you can find one at a wrecking yard (should be around $20). This sensor is the Idle Air Control sensor, and the computer decides how much throttle to give at idle from the readings of the sensor. If it is bad your car will idle poorly or not at all.
You can verify this two simple ways:
1. Disconnect the sensor completely and see if anything changes. If you get the same issue, then it's probably the sensor. If different then it could be fuel delivery.
2. With it all hooked up; try throttling the engine yourself at 1000-1200 rpm and see if it is smooth. If it is then it is probably the sensor. If not then could be the fuel delivery.
The sensor is under the silver and black, plastic KIA cover over the engine (4 small nuts to remove), and is center above the engine on the front side of the intake pipe.
The part looks like this:
If it seems to still be fuel delivery, the filter is (facing the engine from the front of the car) down to the left and toward the back attached to the fender well (Just to the right of and below the battery)
Posted on Jul 12, 2009
remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley u might wanna google knock sensor so u knoe what it looks like
Posted on Feb 19, 2010
Tips for a great answer:
Sep 15, 2012 | 2002 Kia Sportage
Mar 17, 2012 | Cars & Trucks
Keep a regular schedule for inspecting the spark plugs on your 2002 Kia Sportage. According to the official 2002 Kia Sportage owner's manual, spark plugs and ignition wires should be inspected every two years or 48,000 miles, whichever comes first.
Let your 2002 Kia Sportage sit for a few hours before opening the engine compartment. You want to make sure that the engine is cool before you begin working on it.
Pop open the hood of your Sportage and locate the ignition wires, which will be attached to the top of your engine. The 2002 Kia Sportage has a four-cylinder engine, meaning there are four spark plugs each attached to an ignition wire. The ignition wires run from the engine to the fuse box, which is located in the left side of the engine compartment.
Inspect the ignition wires of your 2002 Kia Sportage. These wires will need to be replaced if they appear worn.
Disconnect the ignition wire to your spark plugs. Grab the rubber boot located near the base of the wire and pull upward instead of yanking on the wire. Remove only one wire at a time, or mark the wires with a colored Sharpie marker before disconnecting all of them. Improperly reconnecting the ignition wires can seriously affect the performance of your Kia Sportage.
Attach the spark plug socket to your socket wrench. Use the socket wrench to remove the spark plug from the top of the engine's cylinder.
Inspect the spark plug. There will be some soot, but if the spark plug is completely covered in soot, it needs to be replaced.
Position your replacement spark plug in place and secure it with the spark plug socket on your socket wrench. Be careful not to overtighten the spark plug after it has been snuggly fitted.
Position the rubber boot of the proper ignition wire in place above the spark plug and insert it with your hands. Close the hood of your 2002 Kia Sportage
Mar 16, 2011 | 2002 Kia Sportage
Aug 19, 2010 | 2002 Kia Sportage
Feb 19, 2010 | 2002 Kia Spectra
Jan 14, 2010 | 2002 Kia Sportage
Sep 18, 2009 | 2002 Kia Sportage
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: