Question about Cars & Trucks

1 Answer

Replace power steering belt

2000 micra 1.0 how do you replace power steering belt

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

There is a tensioner pulley that must be loosened to take tension off the old belt for removal. Is you're power steering light on or flashing ? This model car has electric power steering and has had many problems around the world with the power steering motor. You may want to consult a mechanic on this issue as it could be quit expensive to repair. You can see here http://www.bba-reman.com/catalogue/DetailedProduct.aspx?DetailedProduct=528 the part in question.

Posted on Feb 08, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 20 Answers

SOURCE: Pontiac 2000 Sunfire

look at the hood should have a diagram

Posted on Jul 03, 2008

  • 423 Answers

SOURCE: Replacing 2 belts on a 2000 Mazda Protege

I recommend that you go to any Auto Parts store and by a repair user manual for your 2000 Mazda Protege.  They have pictures and arrows and stuff that you will need to do the whole job.  The non-Mazda version will cost approximately $15.00.
Because of the tensioner that may come off when while you are doing these belt changes, it is too complicated to talk you through this.
But with the manual, I am confident you can change them.

Posted on Apr 16, 2009

SOURCE: 2000 hyundai elantra replaces all the belt ,but

dear friend-if your model came with a multy v belt(pk)then the power steering pump is equipt with a alluminuim pulley,should this be then the belt inbeds into the pulley to deep,replace or file down.

Posted on Jul 22, 2009

  • 363 Answers

SOURCE: change belts

the standard is left out right in, or counterclockwise out and clockwise in, turn bolt to the left

Posted on Jul 30, 2009

elstretchie
  • 140 Answers

SOURCE: what tool is required to remove the screws holding

G'day mate just a word of caution airbags store an enormous amount of pressure energy not for the faint hearted take it to a service centre experienced in this .

Posted on Apr 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the power steering fluid bottle on a 2005 Nissan micra 1.2s?


it hasnt got one mate its electric

if this helps let me know

cheers
big mike

May 10, 2011 | 1983 Nissan 200SX

1 Answer

Replacing belt on 2000 ford wingstar(diagram) 3.8litre engine


6a0c58e.gif


Item Part Number Description 1 8620 Drive belt 2 3D673 Power steering pump pulley 3 8A528 Water pump pulley 4 10300 Generator pulley 5 6C348 Idler pulley 6 2E884 A/C clutch pulley 7 6B321 Crankshaft vibration damper pulley 8 6B209 Drive belt tensioner

Aug 12, 2010 | 2000 Ford Windstar

1 Answer

Serpentine belt diagrm


Not sure if you have the 3.0L 2V or the 3L 4V so heres both. Hope it helps.. Cobra,, :-)
Accessory Drive Component Locations 3.0L (2V)a0007698.gif
Item Part Number Description 1 10346 Generator pulley 2 8678 Belt idler pulley 3 3A733 Power steering pump pulley 4 8620 Drive belt 5 2E884 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6312 Crankshaft pulley 8 8509 Water pump pulley

Component Locations 3.0L (4V)a0007699.gif
Item Part Number Description 1 3A733 Power steering pump pulley 2 8509 Water pump pulley 3 2E884 A/C clutch pulley 4 8620 Drive belt 5 6312 Crankshaft pulley 6 6B209 Drive belt tensioner pulley 7 10346 Generator pulley

Jun 05, 2010 | 2000 Ford Taurus

2 Answers

Power stearing not working. merc s500 2000.


Hi, your problem could be down to a couple of things so try the following,
1 check the fluid in the steering pump resevoir if you look under the bonnet you will see the power steering pump and the bottle you need to fill up it should have steering written on it, check the level and top up if needed.
2 check the belt is still connected to the steering pump have a look and make sure the belt has not snapped that drives the pump its the belt that drives the alternator etc but the pump may have seperate belt but it will be the same side as the alternator.
3, if after doing the above and the belt is ok then this would indicate the pump is no longer working and if this is the case then your going to need to get the pump replaced, doing this will solve your problem.

May 07, 2010 | 2000 Mercedes-Benz S-Class

1 Answer

2000 Blazer LS. Power Steering doesn't work,


you have a belt for the power steering, check to see if belt broke and fell off ,if belt is still on, check fluid in power steering , pump might have gone out also, if full of fluid and belt is on, pump or rack is gone, hope this helped,thanks robert b.

Jul 06, 2009 | 2000 Chevrolet Blazer

1 Answer

2000 hyundai elantra replaces all the belt ,but power steering changer belt 3 times and still makes nosie


dear friend-if your model came with a multy v belt(pk)then the power steering pump is equipt with a alluminuim pulley,should this be then the belt inbeds into the pulley to deep,replace or file down.

Jun 30, 2009 | 2000 Hyundai Elantra

1 Answer

2000 2500 Silverado 6.0 no power steering or power brakes.


It sounds like you lost the power steering pump or belt. The brakes utilize pressure from the power steering pump via the hydro-boost. If it is the pump, and the belt is still intact, you will probably want to replace the belt as well.

Jun 06, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Power steering belt replacement for 1998 bmw 740i


your power steering pump should have a adjusting pinion nut.you loosen the pinion nut to loosen pump so you can replace belt.or you have a automatic belt tensionener you rotate tensioner clockwise to replace or remove belt.

May 23, 2009 | 2000 Renault 181

1 Answer

Cadillac 2000 Deville Power Steering Pump


TRY REPLACING BELT, POSSIBLE CHEAPEST OPTION...BUT SOUNDS LIKE TWO PROBLEMS
THOU BELT AND RACK???

Sep 16, 2008 | 2000 Cadillac DeVille

1 Answer

Power steering renault clio 2000


the car has 2 belts. 1 for the alternator. the other for the power steering. the sound you heard could have been the belt snapping . check under the bonnet on the driver side.

Jul 15, 2008 | 2000 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...