Question about Cars & Trucks

Open Question

How much oil for vr commodore gearbox - Cars & Trucks

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 881 Answers

SOURCE: how do i replace the gearbox of a holden VR?

Taking out the tail shaft from the rear diff but before pulling out of the gearbox Drain the oil from the box,take out the shaft,Take off the battery earth lead,and now the starter motor.and the bottom metal plate at the bottom of the bellhousing (should be 4 small screws. and undo the 4 bolts on the flywheel metal plate which hold the torque converter on to engine. undo the bellhousing bolts and the top hose on the radiator ,and the gearbox X member and let down g/box slowley and slide it off WITH converter on the box ,
When refitting the other box its all in the reverse of removal (ALL OF IT) as well as the converter on the gearbox before it goes in as it fits on the shaft and turn it around and keep going untill it slips into the 2nd lot of splines and in line with the bell housing face.(Do not damage the g/box seal).
Let me know how you get on , Aussie Ron

Posted on Nov 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix VR Commodore ignition switch?


Please go to JustCommodores and the guys will help you out with that. Here is the Forum link.......
Forum VR VS Holden Commodore 1993 1997

Aug 22, 2016 | Cars & Trucks

1 Answer

Does anyone know why my gearbox on my vr commodore snaps in the same spot everytime I put a new one in ? Been threw 3 of them so far ..Help !


can you tell us what snaps and where it is happening in the transmission. What has been done to fix the problem or is it just replacement boxes all the time . have the boxes been professionally rebuilt or done at home

Jul 20, 2014 | Cars & Trucks

1 Answer

I was talking about a vp commodore v6 manual can I put either a vr or vs manual tailshaft in my vp manual commodore v6


join a Commodore forum
and win.
only real forums have SWAPS page, this form here is brain dead.
no structure. (besides, cars and trucks)
google that, see em..... ok?

Jun 27, 2014 | Cars & Trucks

1 Answer

Locate fuel fuse in vr commodore


sounds like someone bumped a vacuum hose or didnt put one back on

Feb 27, 2014 | Ford F-150 Cars & Trucks

1 Answer

Auto gearbox 5lt v8


possibly shift solenoid problem or a more major internal issue with trans
but check oil level and quality of oil

Jan 20, 2014 | 1998 Holden VT Commodore

1 Answer

Vr commodore automatic transmission drain plug


vr commodore don't have an actual drain plug..
When doing a service or draining the trans fluid you need to remove the whole transmission pan.there is 16 bolts you need to remove .

Jan 17, 2014 | 1989 Cadillac Sedan DeVille

1 Answer

Firing order 4 1994 holden commodore v8 vr hsv


The firing order for a 5.0l vr commodore is

1-2-7-8-4-5-6-3.

Oct 28, 2013 | Holden Cars & Trucks

1 Answer

Milky oil in vr commodore


milky oil in commodore enigine or any engine is the sign off leaking head gaskets or cracked cylinder heads and the coolant and oil are mixing which is the cause of the milky coloured oil

Jul 10, 2010 | GMC Envoy XL Cars & Trucks

1 Answer

How do i replace the gearbox of a holden VR?


Taking out the tail shaft from the rear diff but before pulling out of the gearbox Drain the oil from the box,take out the shaft,Take off the battery earth lead,and now the starter motor.and the bottom metal plate at the bottom of the bellhousing (should be 4 small screws. and undo the 4 bolts on the flywheel metal plate which hold the torque converter on to engine. undo the bellhousing bolts and the top hose on the radiator ,and the gearbox X member and let down g/box slowley and slide it off WITH converter on the box ,
When refitting the other box its all in the reverse of removal (ALL OF IT) as well as the converter on the gearbox before it goes in as it fits on the shaft and turn it around and keep going untill it slips into the 2nd lot of splines and in line with the bell housing face.(Do not damage the g/box seal).
Let me know how you get on , Aussie Ron

Nov 23, 2009 | 1994 Honda Accord

4 Answers

Vr commodore takes awhile to go into reverse


if it isnt low on transmission oil your reverse gear solinoid needs to be changed take but i suggest you check where your leak is comming from id say it would be tha pan gasket

Apr 12, 2009 | 1997 Honda Passport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...