Question about 1995 Mitsubishi Lancer

Open Question

I have 96 ce lancer sedan, today it lost all its gear. Its just revs n does not move. The transmission fluid is full. Would it do this if the torque convertor seized or could it be a problem with the gearbox? Is making a winding sound when changing down to a lower or higher gear but not grabbing.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ollieboy41
  • 36 Answers

SOURCE: 02 lancer

Most cars you top up the trans fluid through the stem that the dip stick for the transmission goes into.

hope this is helpful.

Posted on Jun 10, 2008

Ad
ewashmidas
  • 362 Answers

SOURCE: need transmission fluid for an 02 lancer

Manual Transmission Plug Locations
c0f851e.png

Posted on Feb 02, 2009

  • 259 Answers

SOURCE: which fuse is for brake lights for ce lancer 98 coupe

just go through them all one by one until you find the fuse

Posted on Mar 26, 2009

  • 290 Answers

SOURCE: 1998 Lancer GLXI Manual Sedan crunches from 1 to

rpw makes the gearboxes. they are notorius for being noisy and bad. but at this time mitsubishi doe not have any recalls at this time. My plymouth champ had this almost identical gear box, and it was always a problem.

Posted on Sep 03, 2009

Testimonial: "Thanks I will have to try and find a better gearbox replacement. "

  • 538 Answers

SOURCE: I need to know what type of transmission fluid

Even though it's a manual trans it probably takes automatic trans fluid. It should tell you in the owners manual, if they only give you the Mitsubishi part number a auto parts store should be able to tell what that number crosses to.

Posted on Dec 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The transmission won't move in forward but will in reverse?


get the OBD codes read as will point you in the direction of the fault

Oct 15, 2014 | 2007 Hyundai Elantra Limited Sedan

1 Answer

Possible Transmission problem. When gas applied, engine revs but no acceleration. Will accelerate when placed on 2 and L gear. Reverse is fine. Fluid level is full and no visible leaks. Do I need


You might try to get a free scan from Autozone, Oreilys, or Advance autoparts. If their scanners will not show a Code, the more complicated Dealer Scanners may.

Some of the transmissions use shift solenoids. The solenoid for 3rd and 4th gear may be bad. Some use speed sensors which tell the transmission to advance to the higher gears. If you can manually reach 1st and 2nd and reverse, the Torque converter is working and fluid is moving inside the transmission.

I think you can call around to see what other places would charge to put a rebuilt transmission in, if yours can not be fixed.

Mar 22, 2014 | 2002 Mercury Cougar

1 Answer

Transmission fluid


You need to replace your torque converter, your Transmission does not move/turn in any way while in park the only part that does is the torque converter. I would also get a full fluid change when that is done as well.

Dec 10, 2013 | 1998 Chevrolet Tracker

1 Answer

Hi! We've got a 1989 240 sedan with a transmission problem. Mid drive it lost all power and now won't move in any gear position. The engine seems fine and the transmission oil looks clean. If you give...


have u checked the transmission filter? maybe u could also have a clogged line? it sounds like there could be transmission shavings in ur pan too take it off clean it up and change filter and change the fluids and see if that helpped!

Sep 07, 2013 | Volvo 240 Cars & Trucks

1 Answer

97 Corolla Automatic Transmission problems


Torque Convertor or clutches. Strip down and find out what it is.

Jun 16, 2017 | 1997 Toyota Corolla

1 Answer

Pulled this code off my 05 lancer po736 what does it mean


Here is the definition for the code.

P0736 MITSUBISHI Description This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:

Torque converter slip ratio = A x C/B

A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit
Read more: http://engine-codes.com/p0736_mitsubishi.html#ixzz27FemXvl5

Sep 22, 2012 | Cars & Trucks

4 Answers

Will go in overdrive but nothing else


The first step with any automatic transmission problem (if you haven't done it already) is to check the fluid level and quality. Inadequate or contaminated transmission fluid may result in shift failure or damage to the transmission. In particular, if the fluid is burned or has metallic particles in it, the transmission probably needs to be torn down and repaired. A clogged filter screen could also cause the problem, but this is rare unless dirt gets in or there is a worn-out part.
If you have to rev up to high rpms to get the vehicle moving, you may have a torque converter problem.

Dec 08, 2011 | 1988 Ford Bronco II

1 Answer

I own a 1995 chevy lumina sedan and am having transmission problem. I recently have chenged te transmission and in the beggining i worked perfectly but today when i slowed down to take a turn, and then...


Check the fluid level. If it is okay, did you change the torque convertor when you changed the transmission? Sounds like one of the two is the problem./

Sep 25, 2010 | 1995 Chevrolet Lumina

Not finding what you are looking for?
1995 Mitsubishi Lancer Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...