SOURCE: 1994 toyota corolla alternator belt replacement
loosen the bolt that is holding the adjuster of the alternator. loosen the belt by pulling it and the alternator would slide in. remove and replace the belt.
do the reverse on installation.
remember to tighten all bolts of the adjuster and alternator after tightening the belt.
tnx 4 using fixya,
drcool
SOURCE: need belt schematic for 2006 toyota corolla
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
SOURCE: diagram 2003 toyota rav4 serpitine belt routing
http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?partName=Engine+Mechanical&pageId=0900c1528019c35b&partId=0900c1528019c35b
go here i think this will help
SOURCE: 2008 Toyota Corolla
Hello, i have enclosed a routing diagram for your corolla! Hope this info is useful to you and have a great weekend!
2,058 views
Usually answered in minutes!
×