Question about 2003 Nissan Sentra

Open Question

Engine oil for 2004 pulsar

Nissan pulsar engine oil type

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
savdragon
  • 37 Answers

SOURCE: please help , where can i see the oil filter of

Your oil filter is screwed onto a threaded tube coming out of the block (which is the lower part of the engine. Get you new filter and look under the engine you should see it clearly. It may not be the same color but it should be the same shape & size. It should unscrew counter clockwise, make sure the this rubber gasket comes off with the old filter. You can use any suitable tool to remove the old one but only put the new one on hand tight. Usually lubricating the gasket on the new filter is a good idea. Just use some engine oil. You car takes 3 3/4 quarts 5w30 oil after draining old oil & removing filter.

Posted on Mar 18, 2009

Ad
  • 171 Answers

SOURCE: 1988 Nissan Pulsar will not engage clutch. Engine

You need to replace the clutch and pressure plate --your clutch is worn out. Plus other parts like throw-out bearing ,pilot bearing and may even need the flywheel machined flat.
You need to take it to a shop or if you are mechanicaly minded could do it your yourself,

Posted on Nov 15, 2009

jlisagearhea
  • 412 Answers

SOURCE: Car maintainance for Nissan Pulsar Vector 1990

Yes, Yes, Yes, and Yes.....All that you want to do you can perform yourself and save quite a bit of money.You can actually find a VERY VERY descriptive online manual(which i have too) at alldata.com You pay a $20 fee and you get online manuals for five years for one vehicle.Definitely worth it.This makes auto work much easier.Any other questions get back to me...I'M HERE TO HELP!!!

Posted on Dec 04, 2009

  • 15 Answers

SOURCE: i don't know what engine oil to top up my nissan

if you're in a bind anything's better than nothing. it's best to stick with a certain brand though. Decide on a 10w-30 or 15w30, and stick with it. If not sure what has been in the engine before, change the oil and filter. If switching to a synthetic, definitely change the oil and then top off with the synthetic.

Posted on Jan 21, 2010

countrybo331
  • 79 Answers

SOURCE: What oil is used for this vehicle

u can use 10/30 motor oil or 5/30 motor oil but i wouldnt use anything thicker then that

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recommended engine oil for 2004 nissan pulsar 180000 klms


quality brand 20w-40 engine oil
you can use semi synthetic or full synthetic but as the oil should be changed every 10,000miles , it is not the cost of the synthetic oil
remember that the viscosity of the oil will depend on the ambient temp in your operating area so read your owners manual or talk with accredited service centers to help you decide

May 08, 2017 | Nissan Cars & Trucks

2 Answers

I don't know what engine oil to top up my nissan


Hello! Any major brand; 10W-30

Guru...........saailer

Jan 21, 2010 | 1990 Nissan Pulsar

1 Answer

Car maintainance for Nissan Pulsar Vector 1990


Yes, Yes, Yes, and Yes.....All that you want to do you can perform yourself and save quite a bit of money.You can actually find a VERY VERY descriptive online manual(which i have too) at alldata.com You pay a $20 fee and you get online manuals for five years for one vehicle.Definitely worth it.This makes auto work much easier.Any other questions get back to me...I'M HERE TO HELP!!!

Dec 04, 2009 | 1990 Nissan Pulsar

1 Answer

1994 nissan pulsar import. Need to know how to do a oil change thanks


remove oil pan drain plug, drain oil. check gasket on drain plug re-install drain plug , fill oil to correct level.

Aug 12, 2009 | 1990 Nissan Pulsar

1 Answer

Nissan pulsar 1988 wont go into gear I can put the gear stick in the right gear but does nothing wont reverse or drive, its automatic and has a reconditioned engine in it


try checking your transmission oil (i had the same problem but after $30 it was fixed) it might had drained out. if your transmission oil is fine then consult a mechanic preferebly an automatic transmission specialist. may be your transmission needs a rebuild.

May 20, 2009 | 1988 Nissan Pulsar

2 Answers

Please help , where can i see the oil filter of nissan sedan 1990 pulsar on this car engine. i try to look around the engine i did not notice the oil filter. im tryin to put new engine oil and the oil...


Your oil filter is screwed onto a threaded tube coming out of the block (which is the lower part of the engine. Get you new filter and look under the engine you should see it clearly. It may not be the same color but it should be the same shape & size. It should unscrew counter clockwise, make sure the this rubber gasket comes off with the old filter. You can use any suitable tool to remove the old one but only put the new one on hand tight. Usually lubricating the gasket on the new filter is a good idea. Just use some engine oil. You car takes 3 3/4 quarts 5w30 oil after draining old oil & removing filter.

Mar 18, 2009 | 1990 Nissan Pulsar

1 Answer

What type of Auto Gearbox Oil Should I use for a 2001 Nisan Micra


You could fill it with automatic transmission fluid called ATF or oil called Dextron 2

Nov 12, 2008 | 1988 Nissan Pulsar

1 Answer

Nissan Exa gear problem


Dear Customer,

As you said above your engine oil is goin lickage so find out any crack or pinhole on pipeline for collent oil rails.

replace oil pipies weld any crack found on transmision case thna your gear will work batter.

THNX

May 16, 2008 | 1988 Nissan Pulsar

Not finding what you are looking for?
2003 Nissan Sentra Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...