An expert who has achieved level 3 by getting 1000 points
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
An expert that got 20 achievements.
An expert that got 10 achievements.
Re: Replace the rear light blue/black bumper
They rebuild these urethane soft bumpers, but the rebuilds have to be painted to match. As far as getting one the right color try using a on-line used part locator's service, there are at least a dozen of them, the wrecking yards will email you if they have the part you need, the locaters have access to 1000's of used auto part sellers (wrecking yards)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
at the tail lights the wire is blue, at the rear light junction block ( under the rear body about the center of the rear bumper ) the right side tail light wire is brown/white the left side tail light wire is brown, from the junction block to the tail lights both wires are blue.
this is the light in the rear bumper. this light pops right out. slide a small plastic wedge bettween the rear of the light and pop out or go from behind the bumper and push the side arms in and push light out. look at new light and you will see what am talking about. good luck.
The rear tail lights can be removed by unscrewing the lamp module from inside your trunk, it's a large black knob that you can push on once it's unscrewed to make the lamp module pop out of the bumper socket. The "white" tail lights are accessed from underneath the car by reaching up behind the rear bumper.