Question about 1992 Oldsmobile Cutlass Ciera

1 Answer

Serpentine belt diagram

My oldsmobile cutlas ciera 1992 serpentine belt came off, I need a diagram or a guide on how to put it back on. thank you

Posted by on

  • 1 more comment 
  • Anonymous Dec 07, 2008

    i dont know if the motor mount comes off or not

  • Anonymous Mar 18, 2014

    the idle was adjusted 12 months ago(higher) it was never lowered again. Is that what's causing the high CO reading? if so how do I readjust the idle myself?

  • Anonymous Mar 25, 2014

    Detail procedure for removal and installation of transmission mount

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There should be a factory diagram at the front of the radiator top plate near the passenger side. That's where it is on mine, and it shows with and without AC. I hope that helps

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a serpention belt diagram for a 1992 Audi 100CS 2.8L


The serpentine belt routing diagram for a 1992 Audi 100 CS with 2.8 liters V6 engine

tdisline_73.jpg
CS = Crankshaft
Gen = Alternator
G = Guide pulley
T = Tensioner pulley
AC = Air Conditioning
PAS = Power Assisted Steering

Dec 02, 2010 | 1992 Audi 100

1 Answer

Need a diagram of how a serptine belt is installed on a 1990 olds cutlass ciera 2.5 lieter motor


Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 1990 Oldsmobile Ciera, depending on your size 2.5L Engine options (AC/No AC, etc.).

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/1990/make/oldsmobile/model/cutlass_ciera/1990_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Feb 20, 2010 | 1990 Oldsmobile Cutlass Ciera

1 Answer

Routing of serpentine for 92 oldsmobile cutlass ceria with a/c


My apologies for the delayed response. I am going back to answer unanswered questions.
CLICK
on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1992/make/oldsmobile/model/cutlass_ciera/1992_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Jan 16, 2010 | 1992 Oldsmobile Cutlass Ciera

2 Answers

Changed the water pump now I cannot get the belt


1992 OLDSMOBILE CUTLASS CIERA - L4 2.5L 2474cc 151ci GAS FI N R
Belt Routing Diagram Multiple Accessory, w/o A.C.
35a3706.jpg



1992 OLDSMOBILE CUTLASS CIERA - L4 2.5L 2474cc 151ci GAS FI N R
Belt Routing Diagram Multiple Accessory, w/A.C.
1942f63.jpg


1992 OLDSMOBILE CUTLASS CIERA - V6 3.3L 204ci GAS FI N N
Belt Routing Diagram Multiple Accessory, w/A.C.
cc9b2dd.jpg

For more details, dan visit DAYCO Catalogue.

I hope helps with this (remember rated this help) Good luck.

Dec 28, 2009 | 1992 Oldsmobile Cutlass Ciera

4 Answers

I will need to replace the serpentine belt. Where can I find an illustration which shows any unexpected hindrances to getting this done?


2000 OLDSMOBILE INTRIGUE - V6 3.5L 214ci GAS FI N H

Serpentine Belt routing diagram
2435ff0.jpg

You will need a ratchet and a strong friend. Put the ratchet on the bolt on the pulley that moves. You will know which one it is because when you turn it the belts wll loosen and tighten on the pulley. have some one hold the ratchet down so you can remove the belt from the pulley... pull it off.

Remember how it came off to put it back on. Once you pull the belt off you can let the ratchet go. Put the belt parallel with the pulley and pull the ratchet down. When it loosens the pulleys slide the belt on and let the ratchet go. Remove ratchet. Don't start the car but tap the key forward 3 to 4 times to make sure the belt is on track.

Then start it up!

More details and graphics you can find in autozone.com (free register).

Hope helped with this; remember rated this help. Good luck.


Nov 24, 2009 | 2000 Oldsmobile Intrigue

1 Answer

1992 Oldsmobile Culass Ciera/S 6 cyl. Serpantine Belt Diagram


CLICK on the following LINK.
It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1992/make/oldsmobile/model/cutlass_ciera/1992_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Oct 11, 2009 | 1992 Oldsmobile Cutlass Ciera

2 Answers

I need the serpentine belt routing diagram for a 1993 cutlass ciera V6 3.3


Call any good parts store and they have pictures in the front of their belt catalogs that show the routing diagrams of each car.

Sep 10, 2009 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

Related Topics:

482 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...