Question about 2003 Toyota RAV4

4 Answers

Timing marking 1az engine

Timing chain problem and injector wiring

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 17,970 Answers

Accordint with Repair Manual/ENGINES + AUTO.TRANS/1AZ-FSE...


timing marking 1az engine - 2_8_2012_6_11_09_pm.jpg

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 08, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 22,095 Answers

No idea to be honest and i would like to help but iam at a loss here now i do know that these common rail diesels do suffer from the injectors packing up where they get too hot and this causes the electrical solonoid inside the injector to fail ,now the timing mark should be on the back of the camshaft as a slot with the largest part of the slot at the top ,if no one can answer later then post a reply and i will explain how to set the timing up without any timing marks

Posted on Feb 08, 2012

  • yadayada
    yadayada Feb 08, 2012

    colin we do not have diesels in Rav4's in USA.

  • Colin Stickland
    Colin Stickland Feb 10, 2012

    yes sorry about that but i done it at least twice ,like to know how someone has uploaded a pic as mine always tells me its a javascript void sort of message ,Also i dont have access to the all data disks everytime i download a copy they always seem that the crack doesnt work .But i still beleave in my advice to leave the top engine covers off so the engine stays cooler ,well here in spain it does where its mucho calor most of the year .

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1az-fe Engine mati mati saat tekan gas???
Apa masalah??
Thanks you

Posted on Apr 20, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 75,108 Answers

You will need a service manual, you can access one here www.alldatadiy.com

Posted on Feb 08, 2012

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 564 Answers

SOURCE: 2002 RAV4: where can i find a manual on timing the 1az engin...

try auto-zone or napa if they dont have one for a foreign engine try one of those specialist parts stores that deal with only imports yoou should be able to find all the info you need.

Posted on May 07, 2010

  • 40 Answers

SOURCE: 93 toyota pickup 22 re motor, idles very rough

it is possible.

Posted on Mar 05, 2009

seanpwright
  • 2030 Answers

SOURCE: changed motor from 1az to 2az . knock sensor

AH hate to tell you this but you cant. Incompatible system, and computer will not know what to do.

Posted on Jan 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i test an injector driver on a 1az-fe engine model 2002


You need a test jig that monitors the Powertrain control module in real time, in short you can't do this at home

Sep 21, 2016 | Cars & Trucks

1 Answer

How do I replace the oil pump on my 2001 Toyota rav4


You have to take the front covers off the engine and while you are that far into the engine you should replace the timing chains; there are kits of all parts needed available. Here is a link with lots of good information:
1az fe balance cam shaft

Jan 29, 2015 | 2001 Toyota RAV4

1 Answer

After changing the engine timing chain, ( Engine 1AZ fse) the car starts but there is a very disturbing noise from the engine and a check engine light on the dash board. please help


Sounds as if you may have gotten belt installed with out putting all the cam gears in exactly the correct position. Your shop manual should have a picture of how to line everything up.

Dec 10, 2014 | Cars & Trucks

2 Answers

Timing marks for zd30 d22 injector pump


Most engines are required to be a TDC or Top Dead Center and then align the timing mark on the injector pump with the housing or mounting surface mark. I would obtain a specific manual for your engine...just to make sure. Best Wishes.

Sep 04, 2014 | Cars & Trucks

1 Answer

Problem hardstart 1az engine


Timing chain has probably stretched!! So cams will be out very common

May 09, 2014 | 2002 Toyota RAV4

1 Answer

TIMING MARKS TOYOTA NOAH 2002 1AZ FSE ENGINE


Timing chain arrangement for Toyota 1AZ-FE:

23180378-rjhearb2zcmiild5qyct32fs-5-0.png

Jan 28, 2014 | 2000 Toyota RAV4

2 Answers

2002 RAV4: where can i find a manual on timing the 1az engin...


try auto-zone or napa if they dont have one for a foreign engine try one of those specialist parts stores that deal with only imports yoou should be able to find all the info you need.

May 07, 2010 | 2002 Toyota RAV4

1 Answer

Where are the timing marks on a 3.1 td bighorn


Only one timing mark which is on the main shaft. The injector pump and camshaft are timed with a bolt.. their is a small hole in the camshaft and injector pullys and a treaded hole in the engine behind them. Keep turning the engine until the mark on the bottom shaft is looking up and the holes in the pullys are lined with the holes in the engine if you are changing the belt or chain(***.Import) then put in two screw's if you are just checking the timing then a screwdriver will do. Cheers

Aug 18, 2009 | 1996 Isuzu Trooper

1 Answer

Fuel injectors won't spark on 94 nissan


The timing may be out.The timing chain may have been installed wrong with the timing marks out of alignment with the ones on the camshaft and crankshaft.If the distributor was removed that could be it too. To time it, if the timing chain was installed right , Take off the distributor cap. Make a mark where the number one spark plug wire is. remove the number one spark plug. turn the motor manually (in nuetral) with the parking brake on.Turn the motor and install a screwdriver or other shaft inside the number one sparkplug hole. Turn until it is at the top and you can feel it with the screwdriver. turn the rotor to the mark you placed on the number one wire. replace the cap. remove the screwdriver and replace the sparkplug . Your engine should be timed now. if not check your timing belt to see if it is in alignment with the proper marks on the cam and crankshaft.

Aug 04, 2008 | 1994 Nissan Pickup

6 Answers

Timing belt/chain


This engine has a timing belt.Once you have removed the engine front cover , turn the engine to the marks as shown in the diagram.Lock the crankshaft in this position with an old reverse light switch from the gearbox by inserting it into the hole under the bell housing (manual transmission).Before removing the belt , loosen 3 bolts on the injector pump after you locked this with a 8.5 mm drill bit.Replace the belt and pull the tensioner to 16 Nm.If you are fitting a whole pulley replacement kit take note of the upgraded spacers and their position.e60a21d.jpgDont forget to tighten the injector pump bolts again after you tensioned the belt and recheck your timing marks.

Aug 02, 2008 | 1996 Land Rover Discovery

Not finding what you are looking for?
2003 Toyota RAV4 Logo

3,480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...