Question about Cars & Trucks
We do not have any manuals for commercial equipment. so sorry. Just no call for it.
Posted on Feb 08, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 14, 2016 | Cars & Trucks
Jul 17, 2015 | Cars & Trucks
Things You'll Need
the vehicle on a level surface and make sure the front wheels are pointing
straight ahead. Make sure the vehicle is in park (or in gear if you have manual
transmission) and set the parking brake.
the pitman arm from the steering box from underneath the front of the vehicle
by turning the holding bolt in a counterclockwise direction with an adjustable
wrench. Place a pitman arm puller (available at auto parts stores) over the
pitman arm and tighten the nut on the puller in a clockwise direction with an
adjustable wrench until the pitman arm loosens from the steering box shaft.
Remove the pitman arm and the puller.
the hood and loosen the lock nut on top of the steering box from the engine
compartment with an adjustable wrench in a counterclockwise direction.
a torque wrench on the steering shaft and turn the wrench one complete turn.
Make sure the torque reading is approximately 2 inch pounds. Tighten the
adjusting nut on top of the steering box (it comes out of the center of the
lock nut) in a clockwise direction with an adjustable wrench one half turn if
the torque wrench reading is too low. Loosen the nut in a counterclockwise
direction if the reading is too high.
the steering shaft with the torque wrench again. Make adjustments to the
steering box adjusting nut as described in Step 4, if needed, until the correct
reading is obtained on the torque wrench.
sure the steering wheel is in the straight ahead position and reattach the
pitman arm to the bottom of the steering shaft on the steering box. Tighten the
holding nut in a clockwise direction with an adjustable wrench until the pitman
arm seats into place.
the lock nut on top of the steering box with an adjustable wrench in a clockwise
direction. Close the hood
Jul 24, 2012 | 1993 Buick LeSabre
Jul 24, 2012 | 1994 Chevrolet K1500
Mar 03, 2012 | Chevrolet 2500 Cars & Trucks
Oct 31, 2011 | Cars & Trucks
Jul 12, 2017 | Ford F-350 Cars & Trucks
Feb 02, 2010 | 1997 Chevrolet Suburban
Sep 06, 2009 | 1994 Chevrolet K1500
May 07, 2009 | 1996 Chevrolet S-10 Pickup
Oct 19, 2017 | Cars & Trucks
139 people viewed this question
Usually answered in minutes!