Question about Citroen DS

Open Question

How to change oil&filter 1968 citroen ds 21

How to change oil filter

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: oil & filter change

If there is a Auto Zone around your area, you can get the oil and filter there with the step by step  instructions needed to get the job gone. There is a oil filter wrench for you to buy to remove the old oil filter, buy the oil filter cup that attaches to the ratchet, the other wrenches tend to crush the filters. Keep me posted be glad to answer any questions and give you instructions to the oil change procedure if Auto ZOne could not help you or there is not one around you. 

Posted on Jul 01, 2009

  • 1752 Answers

SOURCE: Oil & filter change 2005 Audi A8

That's not a question, try again.

Posted on Dec 26, 2009

TDISLine
  • 1874 Answers

SOURCE: i need to change the oil and oil filter how mutch oil do i need and what grade for a citroen xsara 1587cc petrol

Oil filter replacement:

1. Removing:
"a" tabs
(1) Filter element protective cover
(2) Seal
(3) Filter element of the oil filter
(4) Plunger tube.
Untighten the filter element protection cover.
The filter element protection cover incorporates a 27 mm on flats Allen screw with 2 lugs at "a" which enable it to be held in a Facom S27 HLA socket.
Remove the cover (1).
2. Repair: When removing the filter element, the plunger tube ( 4) frees the oil return pipe, thus permitting the oil remaining in the filter element to return to the engine sump.
The filter element ( 3) and plunger tube (4) assembly should be replaced at every service.
Filter element protective cover : Tightening torque : 2,5 (0; -0,5) daNm. Proceed in the reverse order to removal.
11_10_2011_7_38_05_pm.jpg

Posted on Nov 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Oil coming out exhaust pipe, wont idle on 1968 VW motor


You need to remove the motor & dismantle it, then check the cylinder sleeves & pistons for wear, the rings will definately be worn. Best is to have the motor reconditioned if you are unable to do it yourself. There are no short cuts if oil is emitting from the exhaust.

Sep 21, 2015 | 1968 Volkswagen Karmann-Ghia Cabriolet

1 Answer

The engine misfires


Take it back to the mechanic.

Feb 16, 2015 | 2008 Citroen C5 2.0

1 Answer

Where is fuel filter location in 2004 citroen c3


Hi dominic

I would like to help you out.
Please have a look at this thread, maybe its what you looking for
http://citroenc3owners.com/diesel-citroen-c3/changing-the-diesel-fuel-filter-t102.html

Oct 02, 2014 | 2005 Citroen C3 1.6

1 Answer

I need to change the oil and oil filter how mutch oil do i need and what grade for a citroen xsara 1587cc petrol


Oil filter replacement:

1. Removing:
"a" tabs
(1) Filter element protective cover
(2) Seal
(3) Filter element of the oil filter
(4) Plunger tube.
Untighten the filter element protection cover.
The filter element protection cover incorporates a 27 mm on flats Allen screw with 2 lugs at "a" which enable it to be held in a Facom S27 HLA socket.
Remove the cover (1).
2. Repair: When removing the filter element, the plunger tube ( 4) frees the oil return pipe, thus permitting the oil remaining in the filter element to return to the engine sump.
The filter element ( 3) and plunger tube (4) assembly should be replaced at every service.
Filter element protective cover : Tightening torque : 2,5 (0; -0,5) daNm. Proceed in the reverse order to removal.
11_10_2011_7_38_05_pm.jpg

Nov 10, 2011 | Cars & Trucks

1 Answer

I need to replace the oil and oil filter


  • TDISLine - your CITROEN specialist
  • Status: Available
  • Rating: 93%
  • My Motto is: "Straight to the fault. Fix it right the first time!"

TDISLine - Cars Repair Online Help!
  • Automotive Engineer
  • With 23 years of cars repair experience
  • Quick Response!
Audi, BMW, Citroen, Daewoo, Fiat, Ford, Hyundai, Isuzu, Jaguar, Kia, Land Rover, Lexus, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Saab, Subaru, Suzuki, Toyota, Volkswagen, Volvo

I can help you trouble shoot and solve your car problems.
Permanently focused on automotive diagnosis & reparations: Check Engine & Traction Control Lights, Brake - ABS & ESP warning lights, SRS - Airbag warning lights, Service messages, and other types of electronic warning indicators.
Complete technical car assistance for DIY reparations: serpentine belts routing diagrams, timing belt or chain replacement pictures & instructions, Service intervals reset, maintenance schedules & procedures, brake pads and rotors replacement, cylinder head gaskets replacement, and all types of needed informations about cars.
If you want to save money by Do It Yourself - DIY, I will guide you step-by-step with detailed instructions & pictures. Depending on the difficulty level of reparations and special tools & equipments required, I will correctly inform you from the start point, so you can choice yourself the best way to fix your car problem.

I'm waiting for you at Marketplace with full info about CITROEN Xsara 1.6 Service instructions & pictures.
http://www.fixya.com/marketplace/service...

Nov 10, 2011 | Cars & Trucks

1 Answer

On my t reg citroen saxa i have oil getting into the cooling system car seems to run and start ok expansion bottle at side of radiator is collecting oil, oil on dipstick is clean. no sign of emulsion in...


does it have an oil cooler under the oil filter? (a lump perhaps half as high as the filter but a bit fatter with 2 rubber water pipes going to it) citroens are well known for these oil/water coolers leaking into the water.

Aug 19, 2010 | 1992 Daihatsu Charade

1 Answer

I have a 1968 mustang with 1966 289 c. code .engine starts good .idels ,good till it reaches running temp. then it sounds like the rockers start to chatter .and mis fires till it dies.it has 40psi on oil...


Yes.sounds like the oil pump is laying down when oil gets hot,,,,,,but,,,,i would try changing oil filter..I have seen Oil filters will **** together after a few min. of run time.....I would never use a WIX oil filter,,have had 3 friends loose engines because of the same thing..........hope this helps......

Mar 01, 2009 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14337 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...