Question about Cars & Trucks
It is telling me that the ratio in first gear is not right
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
replace the input speed sensor to transmission and the wiring pigtail all are available at your chrysler dealer take your vehicle registration in to the parts counter so they have your vin # to get the right part and it is the front of trans by fluid linres to radiator.
Posted on Mar 08, 2009
First check and make sure the fluid is full. The most likely cause is a failed solenoid pack. Circuit codes normally mean something electrical not mechanical has failed. The solenoid pack is on the outside of trans pretty easy to replace.
Posted on Mar 21, 2009
SOURCE: transmission codes:
I WOULD TRY REPLACING THE INPUT SPEED SENSOR..A DEFECTIVE SPEED SENSOR CAN CAUSE ALL OF THESE FAULTS..IT IS LOCATED IN FRONT OF TRANS ABOVE SOLENOID PACK..IT IS THE ONE CLOSEST TO THE ENGINE..IT SCREWS INTO TO TRANSMISSION..A 1 INCH SOCKET FITS IT..ALSO CHECK WIRING TO BOTH SPEED SENSORS..A SENSOR IS ABOUT 35 BUCKS,AVAILABLE AT YOUR LOCAL DODGE DEALER..GET A NEW ONE AND YOU'LL SEE WHAT IT LOOKS LIKE..FAIRLY COMMON PROBLEM..HAVE REPLACED LOTS OF THEM
Posted on Jul 07, 2009
Tips for a great answer:
Jan 08, 2018 | Cars & Trucks
Oct 26, 2016 | 2000 Dodge Durango
May 24, 2015 | 2004 Dodge Dakota
May 09, 2014 | 2009 Hyundai Azera
May 26, 2011 | 1999 Dodge Intrepid
Aug 10, 2010 | 2000 Dodge Durango
Jun 10, 2010 | 2000 Dodge Durango
Mar 08, 2009 | 2002 Dodge Caravan
89 people viewed this question
Usually answered in minutes!