Question about 1996 Ford Ranger SuperCab

Open Question

Is there a fuse for a fuelpump on a 1996 ford ranger

Is there a fuse for a fuel pump on a 1996 ford ranger and were would it be on the fuse pannel??

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: i need a 2002 ford ranger fuse box diagram and afuel pump relay switch diagram

Hi

go to www.motorcraftservice.com then click on the owner guide and put in your truck information
then choose the 1st owner manual printing and should be between page # 184 to 200.

Good luck and I hope this will awnser your question.

Posted on Nov 08, 2008

  • 65 Answers

SOURCE: 2000 ranger fuse diagram

Fuel Pump relay switch is in the main box usually located on the drivers side Fender in a black box. According to the owner's manual in the power distribution box in the engine
compartment (Ford recommends disconnecting your battery)
Relay # 5 is the fuel pump relay , and also in the PD BOX is a 20 amp mini-fuse
for the fuel pump relay + RAP module in location # 9


( P.S. - don't forget your fuel pump inertia switch , in the right front passenger area ,
by the right front kick panel )Sometimes this gets kicked by passenger or if the car is bummed hard it could set this item to shut down fuel system. Best of Luck

Posted on Aug 28, 2009

Testimonial: "I was skeptical, but the answer fit & worked. Thanks!"

Gozer
  • 435 Answers

SOURCE: trying to locate fuse for fuel pump for 04 ford

It's location is in the fuse/relay box under the hood. It's a 20 amp fuse in position 23.

If the fuse is OK there's a fuel pump shut off switch located under the the glove box just above the carpet. To reset it, turn the ignition switch off, push the button on the switch, then turn the ignition on wait a few seconds then turn the ignition off.

Hope this helps

Posted on Jun 29, 2010

  • 1 Answer

SOURCE: i need a diagram of fuse box for 1996 ford ranger

What do the fuse in 3rd row second from left operates? I have the peeping noise that is related to this fuse.
Any help would be appreciated
Grant

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ranger 3.0 truck starts pump runs presser good pump stops no presser after a few minnits


If you are talking about the fuel pump, you have only a few cheap fixes before blaming the expensive fuel pump. The fuel pump relay can overheat and kick out. A new relay could fix this. Autozone.com offers free fusebox layouts and wiring diagrams just for registering your truck with them for free.

Sometimes the horn relay will interchange with other relays. Look at the part numbers and use the horn to test the fuel pump relay. Or switch the 2 relays.

A fuel filter could be clogged and overloading the fuel pump. Put in a new filter.

After that, its a case of testing the fuelpump leads and see if the fuelpump is shut down.

I hope my solution helps.

Jul 16, 2012 | 2005 Ford Ranger

1 Answer

2004 Ranger. 14,000 miles In Feb 2011 the fuel pump stopped working A garage replaced it with a new pump In May it stopped working again The garage replaced it with a new pump again Now July 13th...


Are they replacing it with a aftermarket brand and also if u run the car low on gas this will make the fuelpump strain and go bad try a dealer part

Jul 14, 2011 | 2004 Ford Ranger

2 Answers

Where is the fuel pump switch located on a 2000 ford ranger XLT


Hello tbrank56,

If you are looking for the inertia fuel shutoff switch it's located below the right hand side of the instrument below the glove box.

Regards,
netvan

Mar 14, 2011 | Ford Ranger Cars & Trucks

2 Answers

HAVE A 96 FORD RANGER JUST QUIT ON ME WELL I WAS DRIVING CRACKS OVER BUT NOTHING ELSE CHECK FUSES FUEL PUMP IS WORKING SPARK SEEMS TO FINE


You may have a broken timing belt( look through the inspection cover and verify there is no fraying or broken pieces of belt. if you have fuel,spark,and air, the only thing left is timing.

Feb 21, 2011 | 1996 Ford Ranger SuperCab

1 Answer

Fuel pump fuse blows after bout 20 minutes of engine operation. no shorts found


There may be internal mechanical resistance in the fuel pump causing it to draw more current (amps) when it warms up (for example after 20 minutes of operation). My guess is replacing the fuel pump will fix this problem.

Sep 06, 2010 | 1996 Ford Ranger SuperCab

2 Answers

I have replaced the fuel pump amongst a lot of other things. I can spray gas or starting fluid in the throtal body and it will run rough untill the fumes ware out. Its a 1995 ford explorer 4x4 xlt


If you hear the fuelpump operate the first 1 or 2 seconds when the key is turned to RUN position, the fuelpump is working. If you do not hear the fuelpump run, check the Inertia switch which should be in the side panel of the rear cargo area. If you have an owners manual check for the Inertia switch location.

To reset the Inertia switch, hold the button on it for 2-3 seconds. You should now hear the pump run. You may also have a fuelpump relay under the hood in one of the Powerboxes. The Powerbox may have a fusible link from the Battery. When the fusible link is OK and the Pump Relay is OK, there is a fuse in the Fuse panel. Then finally the Ignition switch will trip the Pump relay. As power flows through the wire to the fuelpump the Inertia switch can break the power connection.

So you have 5 powerpoints before the fuelpump will work. Fusible link, Pump Relay, Fuse Panel, Ignition Switch,and Inertia switch. These must all work before the fuelpump can run.

Aug 14, 2010 | 1995 Ford Explorer

1 Answer

94 ranger 4cyl stopped chuggg dead is it the


check the timing belt It may have broken

May 23, 2010 | 1996 Ford Ranger SuperCab

2 Answers

Will not start, acts like its out of gas


Check all of your fuses,if find that none are shot check your fuel pump.

Jan 29, 2010 | 1991 Ford Ranger Supercab

2 Answers

I keep blowing the 30 amp max fuse. I don't know if it is to the ignition or the fuel pump.


look under the top of the power distribution box it has a diagram.
The max fuse blowing means you have a serious short,a hot wire touching ground perhaps it's broken or pinched somewhere.

Aug 12, 2009 | 1996 Ford Ranger SuperCab

1 Answer

New fuelpump & relay, fuelpump want come on.


check all those item again, especially the crank sensor, check the fuel pump by adding 12v to it, make sure its good. tun on key, make sure your getting 12v from fuel pump wire

Jul 30, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

Related Topics:

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...