Question about 1996 Dodge Stratus

Open Question

No power to the starter

I turn the key and the lights come on but theres no power.the car will not start or turn over.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

underneathme
  • 59 Answers

SOURCE: starting car

loose ground wir, bad wiring, bad starter cullinoid, a number of things

Posted on Sep 23, 2008

freetek
  • 5568 Answers

SOURCE: 2000 dodge intrepid won't start

If the key is returning to  the 'Run' position as it should, then either a relay controlling the solenoid or the solenoid itself is hanging up. The heavy contacts that send power to the starter can develop rough surfaces that can temporarily weld themselves together causing the starter to run on even though the engine is running and the key has returned to the proper position. There is also a spring that should normally help return the solenoid's contacts to their 'off' position that may be weakened. 

Posted on Feb 07, 2009

  • 1 Answer

SOURCE: 2009 dodge durango will not start

it could be that the theft system has something to do with it .it proably that the ignition system has a device in the module the locks the system up when the theft system has been activated you should have the dealer check the ignition system or the theft system check.

Posted on Feb 12, 2009

pippall
  • 1486 Answers

SOURCE: 2004 Dodge Intrepid starter relay

starter solinoid is faulty.

Posted on Jul 13, 2009

  • 14 Answers

SOURCE: Engine check light came on.

it sounds like your starter is blown or maybe the cords are not connected properly. check all cords befor replacing your starter

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motor don't turn nothing dash lights and head lights 1985toyota pu


Do the gauges and warning lights work with key on? If not, check fusible links, AM1 for ignition key power. If the gauges/warning lights work, the key switch has power, so you can follow it to the starter solenoid. The start wire out of the ignition switch is a black/white wire, this is the hot wire to the solenoid, and only has power when key is held in start. With automatics, there is only one switch-a neutral start switch- between the ignition switch and the solenoid on the starter .

With a manual transmission, the black-white start wire goes to both a starter relay and a clutch start switch (on the clutch pedal), those two work together to send the power on to the starter solenoid. So, no crank, good battery, power to key, follow the black/white wire, the start relay and the clutch switch, to the starter solenoid- a hot wire there turns the starter motor on.

Mar 17, 2015 | Cars & Trucks

2 Answers

2003 HyundaI Tiburon GT Diag No-Start


You could check for power on the small orange wire at the starter solenoid on the starter motor-with the key held in start position. Should have power there in start. If you do, take starter off to be tested. If no power, signal is lost between ignition switch and the solenoid. Next find the starter relay under the hood. Hold your finger lightly on it while someone turns the key to start. If you feel a click or movement, check orange wire from there to starter solenoid. If nothing at the relay, move to the starter clutch pedal position switch- a simple on/off switch-check for power to the switch with key held in start. With clutch pedal pressed, it should pass power on to the starter relay, with key in start. If you have no power at the clutch switch in start, between there and the ignition switch is the Burglar Alarm Relay and the BCM box. The start wire out of the ignition switch goes to the alarm relay, and another wire from relay goes to BCM (body control module) to activate the relay so power will pass from ignition switch to clutch switch. That's all, Nathan, pretty simple but then again, not...better invest in a test light or digital volt ohm meter (DVOM). Good for checking electrical circuits, hope its not the alarm or BCM.

Apr 29, 2014 | 2003 Hyundai Tiburon

1 Answer

Starter won't engage heat gauge goes across to hot when trying to start truck. What causes this?


Voltage drop? I'm guessing you don't have a voltmeter, so turn on the headlights and observe them as someone tries to start the truck. If the lights go out, bad connection at battery, starter, or ground. If the lights get dim, probably the starter-it's drawing power, just not working. If the lights don't change, check for power going to the starter solenoid on the small wire on the starter; voltmeter or test light, check if the small wire to the solenoid has power when key is held in start position-in crank position. There should be battery voltage there when the key is turned to crank. If so, the starter or solenoid is bad. If no power there to solenoid, power is lost somewhere between ignition switch and the starter wire.

Mar 05, 2013 | 1994 Chevrolet C1500

1 Answer

My '97 Geo Metro LSi will not start. When I turn the ignition key on the buzzer, idiot lights, lights, horn, etc., everything electrical will work. If I turn ignition key to start, there is absolutely no...


It could be the starter, test the small wire going to the starter, it should have power when turning the key to start/crank. If it does, and the starter will not crank the engine, whack it with a hammer, if it then starts, replace the starter. If there is no power to the starter, then it could be the ignition switch, or the neutral switch, or a fuse/link blown.

Sep 06, 2010 | 1997 Geo Metro

2 Answers

2003 Toyota Matrix won't start. No click when we


yes theres is, try locking and unlocking the pass/side door with the key. you can check for power at the starter at the small wire if theres power at that wire when the key is held in the crank position then you have a bad starter try taping on starter while key is held in start if its starts when tapping then starter is bad,heres a diagram to show you were to tap and where to check for power, hope this helps.4a6e88f.jpg8d713e8.jpg

Feb 10, 2010 | 2003 Toyota Matrix

2 Answers

For the past couple of weeks my kia sedona has not started first time just a clicking noise when i turn the ignition key. Now it wont start at all. I have removed the battery and recharged it. but it hasnt...


soundss like a bad starter, use a test light on small wire going to starter, have somone hold key in the crank position if you get power to the small wire at starter then its a bad starter, hope this helps.

Dec 26, 2009 | 2006 Kia Sedona

1 Answer

Hi i have a vw bora which doesnt start but has ignition lights, when key is turned lights dont fade and there is no click from starter motor


check connections on starter , the small feed should get power when you turn key to start/crank position, if no power to that check the outputs on the back of the switch /ignition barrel,
if power to starter, then check power to back off starter on large cable (goes direct to battery) if power to both, starter u/s
if power at switch but not at small power feed at starter, relay/fuse fault, or if fitted cut out switch

Dec 06, 2009 | 1999 Volkswagen Passat

2 Answers

Car wont start and there is no power to it at all. The security light is on?


do you know if you have an anti-thieft device in your car. sounds like it may be armed and connected to your battery.

Oct 18, 2009 | 1995 Jeep Grand Cherokee

1 Answer

92 cadilac deville gets power when you turn on the key, but won't crank when you turn the key to start.


If getting power means that the lights on the dash come on, that's not enough to start the car. Begin by checking the battery voltage and contact surfaces on both battery cables and terminals. Also check connection at starter and block ground. If you find nothing there, check power at trigger wire (small wire) on starter with the key turned to start position. If there is 12v there, likely the starter is bad.

Jul 07, 2009 | 2000 Chevrolet Astro

2 Answers

Won't start getting nothing when i turn key


Recheck all your connections, battery. starter, look for fuseable link on small wire going to starter. Might want to chk.that wire with test light when key switch is in start position and see if it lights. If it does not light might be starter switch under dash on steering colume.

Apr 01, 2009 | 1983 Chevrolet Monte Carlo

Not finding what you are looking for?
1996 Dodge Stratus Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...