Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool
Posted on Jan 28, 2009
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Posted on Sep 11, 2009
Most vehicles have the routing in the engine compartment, near the top of the radiator or underneath the hood. If no luck consult your owners manual.
Posted on Dec 21, 2009
CLICK on the following LINKS. It has the Belt Diagrams you will need.
The two (2) Links below are for the Escort and the ZX2.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
For the Escort:
For the ZX2:
Posted on Mar 08, 2010
Tips for a great answer:
Fig. Accessory drive belt routing-3.0L engines without A/C
Fig. Accessory drive belt routing-3.0L engines with A/C
Sep 14, 2011 | 2001 Ford Escape
Fig. Accessory serpentine belt routing-3.8L engine (click for zoom)
Using a 15mm wrench attached to the drive belt tensioner pulley, rotate
the tensioner clockwise to release the tension. Remove the drive belt
from the pulley. When installing the new drive belt, ensure that the
drive belt is routed correctly and note the position of the indicator
mark on the tensioner.
Fig. Drive belt tensioner wear indicator marks
Hope helps (remember to rate thsi answer).
Mar 02, 2011 | Ford Windstar Cars & Trucks
Aug 19, 2010 | 2001 Ford Focus
Feb 18, 2010 | 1998 Ford Windstar
Jan 05, 2010 | 2000 Ford Windstar
Sep 14, 2009 | 2002 Ford Windstar Cargo
Aug 04, 2008 | 1996 Ford Windstar
23 people viewed this question
Usually answered in minutes!