Question about Cars & Trucks

Open Question

I purchased a Browning Rod & Reel combo that had a Browning STK 30 reel and the bail came out of the reel the first time I used it . Tell me how I can get it fixed.

I purchased a Browning rod and reel combo fishing outfit. The first time I use it the bail came loose on one end making it unusable. How can I get it fixed?

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 124 Answers

SOURCE: I,ve disconected the tie rod

If it is the inner tie rod you are working on it need to be threaded out on some you can get with a wrench but most you will need an inner tie rod tool. Look at your replacement tie rod you will see the threads and two flat spots that is where the wrench goes. Please rate.

Posted on Dec 13, 2008

  • 2187 Answers

SOURCE: 2007 dodge ram 3500 5.9 liter cummins diesel 2WD tie rod end repa

try moving the ends of the tie rod. there should be a metal sticking out of the rubber ball like part at the end. A worn out tie rod would be easily moved with bear hands while a new one will take some muscle.

Posted on Jun 30, 2009

SOURCE: how do i fix the seat belt rewind on a 1999 dodge

You may have to take this one in. It is an inertia reel and is made to retain tension at all times, if you relieved the tension, reel is "sprung" and will have to be completely disassembled, in some accidents if the seat belt is used in the impact and impact is severe enough, inertia reel has done its intended job and needs to be replace entirely.

Posted on Jan 04, 2010

Testimonial: "I thought that might be the solution. "

  • 18 Answers

SOURCE: replace inner tie rod ends on 2005 gmc 1500

Yes, there is an inner tie rod end wrench, there are a few different types of wrenches available. You should be able to borrow one from one of your local parts stores. (Oreillys, Auto Zone, Napa, etc..)

Posted on Jun 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The rear double seat of my 2013 Mitsubishi Mirage won't raise after folding down due to not enough play in the middle seat belt. How can I release the seat belt to lift the seat again?


sorry but seat belt reel is jammed ,,,, find reel and prob will have to replace it ,,, dont play with safety belts or reels they are too important

Dec 01, 2013 | Cars & Trucks

1 Answer

Reel uit lietjie "help n bietjie jy verlei my" uit watter liedjie kom die reel


Sorry i answer questions in english or spanish ,double dutch is alien to me

Apr 28, 2013 | Cars & Trucks

1 Answer

The horn on my 02 Odyssey will not blow. I've checked the fuse and relay but they were both good. I believe the horn ring or the contact may be broken. How do you get the steering wheel off?


Before you pull the wheel (which involves removing the air bag unit) you can test the horn switch at its connector with the cable reel (newfangled horn ring). First remove the dashboard lower cover under the steering column. Remove the steering column upper and lower covers. Disconnect the dashboard wire harness connector (4 pins) from the cable reel. Check for continuity between the cable reel no.2 terminal (light green/blue stripe wire) and body ground in each horn switch position. There should be continuity when horn is pushed and no continuity when horn is released. If one or both continuity checks fail, then you'll have to remove the airbag and change out the cable reel.

Feb 09, 2011 | 2002 Honda Odyssey

1 Answer

I was trying to replace the old seat belt with a new one because the old one is tore up a little but now both the belts locked up on me and i cant get it to pull or unwind off the reel..is there an easy...


Remove the "loose" end(not connected to the mechanism) of the belt from its mounting point. Let the belt retract a little and then try pulling it again, this time slowly. Unroll the belt completely and make sure it has not twisted in the reel. If the belt is completely rolled into the reel, pull as hard as you can and release it slightly then pull slowly again. Dismantling the reel is not recommended. This is a safety critical unit. You dont want it failing because you reassembled it incorrectly.

Sep 15, 2010 | Nissan Sentra Cars & Trucks

1 Answer

Passenger seat belt cannot be loosened - remains taut


will either mean that the reel has become jammed or that the reel is no longer mounted in the correct position ( if out of vertical alignment this will cause it to "lock" due to the hanging activator) Strip back to find reel, if in correct position will need a new/2nd hand one

Feb 14, 2010 | 2004 Kia Amanti

1 Answer

How do i fix the seat belt rewind on a 1999 dodge ram 1500. The belt was twisted so i removed it from the reel. In the process the reel spun releaving the spring. I tried to rewind the reel but i can't...


You may have to take this one in. It is an inertia reel and is made to retain tension at all times, if you relieved the tension, reel is "sprung" and will have to be completely disassembled, in some accidents if the seat belt is used in the impact and impact is severe enough, inertia reel has done its intended job and needs to be replace entirely.

Jan 04, 2010 | 1999 Dodge Ram

1 Answer

I have a 2005 honda crv, after changing the steering rack the cruise control is not working


There is a cable reel (clock spring) in the steering column. If it was not centered when you put in the rack than it probably broke.... Is the SRS light on too? This cable reel allows electrical connection to the air bag and the cruise control switch (mounted to the steering wheel), so you can turn the wheel. Its operating range is two and a half turns from center in both direction. When you disconnect the steering coupler from the rack the steering wheel moves, now the cable reel is not centered. If you put it back on in this position and turn the steering wheel fully to one side the cable reel breaks. That could be what happened, however the cable reel is very expensive so make sure that's it before replacing. I recommend performing an input test on the cruise control unit to confirm.

Nov 09, 2009 | 2005 Honda CR-V

1 Answer

1993 Honda Accord Emergency Brake + Rear seatbelt not retracting


The e-brake probably has an adjustment nut either under the brake when you have it pulled up or simply removing a small plastic plate at the back of the console as seen from the rear seat.
You wil probably need about a 12mm deep socked to adjust it. If the nut is bottomed out you will need to adjust if at the wheels.

As far as the seatbelt, you will need to access the reel assembly and determine if the belt is in a bind or the internal spring in the reel is broken. You should be able to tell what the problem is when you get to the reel.

Apr 22, 2009 | 1993 Honda Accord

1 Answer

Replace airbag on `92 honda accord


When an SRS cable reel assembly is removed and set aside during vehicle repairs, the cable reel may rotate inside the assembly so it is no longer centered. If the assembly is reinstalled with the reel off-center, the cable can break when the steering wheel is turned to full lock. The cable reel holding fixture locks the reel while the assembly is off the vehicle, keeping it centered for reinstallation.
CABLE REEL REMOVAL PROCEDURE
1. Follow the procedure in the appropriate service manual for disconnecting the battery, and removing the dashboard panels, steering column covers, airbag, and steering wheel.
^ Always install short connectors on the connectors for the driver's and passenger's (if so equipped) airbags.
^ Make sure the front wheels are pointed straight ahead before removing the steering wheel.
2. Verify that the cable reel is centered; the yellow gear tooth is lined up with the alignment mark on the cover. Install the cable reel holding fixture in the cable reel assembly as shown. Use a TORX T-10 wrench.
3. Disconnect the 6-P connector, then remove the cable reel assembly.
CABLE REEL INSTALLATION PROCEDURE
1. Verify that the front wheels are still pointed straight ahead.
2. Reinstall the cable reel assembly, and reconnect the 6-P connector.
3. Remove the cable reel holding fixture.
4. Follow the service manual procedure for reinstallation of the steering wheel, airbag, steering column covers, and dashboard covers.
5. Verify SRS operation as described in the service manual. Road test the vehicle.
^ If the steering wheel spoke angle is not correct, change it by adjusting the tie rod ends. Do not remove and reposition the steering wheel.
PARTS INFORMATION
Cable reel holding fixture:
For 1992-95 Civic and Ohio-produced 1992-95 Accord
P/N 77900-SPO-999, H/C 4733564
For 1991 Accord Wagon, 1992-95
Prelude, 1995 Odyssey and Japan-produced
1992-95 Accord
P/N 77900-SM5-999, H/C 4733572
WARRANTY CLAIM INFORMATION
Use the Flat Rate Manual information for the repair being performed.

Jan 28, 2009 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...