Question about 2003 GMC Yukon

1 Answer

ABS brakes The ABS light came on my 2003 Yukon while driving ,then my yukons engine shut off and it pulled real hard to the left.Brake fluid level is good,brake pads and rotors are good.

Posted by on

  • Anonymous Mar 29, 2014

    Brake issues

  • Anonymous Mar 31, 2014

    Weird lurching occurring while driving. Happened suddenly out of nowhere. Brake pads are new, don't think it's the rotors because grabbing happens during acceleration, not just when using brakes. Maybe abs somehow?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Your ABS sensor in the front left wheel is bad, this may also meen your wheel bearing is gone. Jack up that side and put you hands on the top and bottom of tire then shake it. if the tire moves alot you need to replace the wheel bearing.

Posted on Oct 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm not getting presure. In. My 03Denali. It want. Move. After my. Abs light and the tracking control light's came. On what to do


try checking the level of your brake fluid, the reservoir is usually on the drivers side firewall, also check your fuses/relays as the abs fuse/relay may have blown.

Mar 24, 2015 | 2003 GMC Yukon Denali

1 Answer

I own a 2002 gmc yukon 2 wheel drive and is a florida vehicle and never left the state .. abs lite and brake lite come on constantly on my dash and lites up,, new brakes and new wheel hubs or bearings were...


It's so much easier to hook up a scanner to read the ABS codes than trying to guess, the brake lite comes on when the fluid is low or your e-brake is on, only takes one click to activate the light.

Jul 28, 2011 | 2002 GMC Yukon XL

1 Answer

I have a 2003 yukon xl that has the ABS light on and the brake light also on, also on the message box were the mileage appears it says service brake system


check brake fluid level first- if low add , second - look at wheels - if a lot of black/brown buildup on wheel- wheel cylinder could be leaking- warning lights tend to come on for a fluid problem

May 10, 2011 | 2003 GMC Yukon XL

2 Answers

My brother's sprayed engine cleaner on my 2003 Yukon XL and then washed it off with a water hose. 30 minutes later while driving my ABS plue Parking Brake lights came on with a message saying Check Brake...


C0550 is the code for the ABS module. It is on the frame under the vehicle around the drivers door area. It is a module with all the brake lines coming from it. Reset the trouble codes and see if the problem returns. If it does, the module is not serviceable and will need to be replaced.

Mar 24, 2011 | 2003 GMC Yukon XL

1 Answer

2004 Yukon XL parking brake alarm and light still on even though brake is off. How do I fix this?


Well, at the brake arm, there is usually a switch around there, somewhere...disconnecting wires would tell if it is the culprit. Often other things use the same warining circuit, like fluid level....
It sometimes is as simple as the brake pedal is not being pulled far enough to hit it's stops... Brake inspection and adjustment is indicated if loosness is the case.

Sep 20, 2010 | 2003 GMC Yukon XL

1 Answer

Why does ny service break system light and abs warning light come on gmc yukon 2003


CHECK FUSES TO BRAKE AND ABS BRAKE SYSTEM.IF FUSE OKAY NO BLOWED BULBS. YOU HAVE A ELECTRICAL PROBLEM IN BRAKES AND ABS BRAKE UNIT.THE DEALERSHIP HAS TO FIX.

Jun 09, 2010 | 2004 GMC Yukon

3 Answers

Gmc yukon has the abs & parking brake light


you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem

Nov 26, 2009 | 2001 GMC Yukon Denali

1 Answer

2003 yukon xl flashing asb and brake light while flashing service brake system. it does it like 6x a month


There is a possibility a ABS sensor is going bad. It's best to have a repair shop hook up a scan tool to the vehicle find the real problem. The ABS system has more than one sensor to cause this problem. So, a Automotive Scan tool is required to find out which is the faulty sensor.

Aug 28, 2009 | 2003 GMC Yukon XL

1 Answer

03 Yukon denali park brake warning wont turn off


hi for info the brakes warning light on dash is also an indication that brake fluid level is low? or there may be a leak resulting in fluid level drop ? also considering age of car you may need to inspect brake pads wear ? if your car has low brake pads wear indicators attached to pads ? or the hand brake switch req's checking to ensure it is being pushed to off position when h/brak is down ? so fluid level low is the obviouse 1st check as fluid will displace from reservoir as pads wear low hence the level indicator on fill cap trips on may i suggest if it is low level b4 you top up? check your b/pads if you have not done so recently? or replaced since new ? hope this helps you locate problem best wishes from the uk

Jan 02, 2009 | 2003 GMC Yukon Denali

2 Answers

ABS bleeding technique on GMC Yukon


If you forced the pads back into the calipers without loosening the bleeders you probably forced gunk into the abs modulator valves. Sometimes doing the automated bleed proceedure (need Tech or Bi Directional Scanner) will bring things back to life.

Nov 30, 2008 | 2003 GMC Yukon XL

Not finding what you are looking for?
Cars & Trucks Logo

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...