Question about 2005 Mercedes-Benz Mercedes Benz E320 Cdi

2 Answers

A/c climate control

Hoh do i reset fault codes of the climate contoler by using the climate controler itself?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If u disconnect the battery, it will cause more fault code in ur car..
every module in mercedes got one function, that self diagnosis..
when it detected no power supply come.. there will be one code come out...
even when u connect b the battery,, the fault code will turn into an event memory in ur module..
the only way to clear the cault code is using STAR DIAGNOSIS..
it can scan and fix all ur problem...
i dont recomemd u tp disconnect battery for clearing fault code as i'm a mercedes's technician and also a STAR user..

Posted on Oct 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercedes-Benz Master
  • 60,775 Answers

DISCONNECT THE BATTERY FOR 10 MINUTES OR SO, THIS WILL ERASE THE CODES, BE ADVISED IF THE PROBLEM THAT SET THE CODES IS UN-REPAIRED WILL BE SET AGAIN.

PLEASE RATE THIS SOLUTION, THANKS .

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold runs god hoh runs rought


Hello
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM

Aug 28, 2012 | Chevrolet Astro Cars & Trucks

1 Answer

Aircondition system wont work although parts are new


Your system air condition is controled by a climate control.The panel will be at fault,You can pull a code using a scan tool that reads MBZ climate control,The solution for the fix is the climate control this is a module

Mar 08, 2012 | 2003 Mercedes-Benz E-Class

1 Answer

I have a 200 mercury cougar 2.5 v6 and i have a problem with the computer system. it runs and idles fine but the electronics in the gauge cluster resets itself once an a while, and sit just the gauge...


For this problem straight solution is to use a diagnostic scan tool and retrieve fault codes which will tell you the exact problem. Could be bad earth or short somewhere or loose connection.

Feb 15, 2011 | 2000 Mercury Cougar

1 Answer

A/C doesn't blow from main stream (face, feet, face & feet etc.,), instead blows from defrosting stream near main glass.


If your Maxima is equipped with Automatic climate control, you must put your control unit into self-diagnostic mode, then follow the troubleshooting chart for whichever fault code is output by the climate control unit. (most likely a mode control motor fault)

If your Maxima is equipped with manual climate control, there are two main causes. The mode control (push button) switch unit and the mode control motor.
The switch must be tested first, then the wiring between the switch and the motor. If these things check good, then the motor should be replaced.

Oct 11, 2009 | 1999 Nissan Maxima

1 Answer

My heating in My Bmw 316i has stopped working. It used to blow on number 4 and now it has stopped altogether. But the light on the dashboard still comes on. I have been told it is the blower motor or the...


Hi,


If your climate control is switching itself off or resetting then it is probably the control module itself which is faulty. Luckily there is a common fault which is easy to repair yourself using the information below. If you don't feel comfortable repairing it yourself and you are in the UK then I recommend you visit http://www.bmw-climate-repair.co.uk who offer a repair service for £35

If you find than the fan is not coming on or is coming on at a low speed then check to make sure the microfilter is not blocked. If it is not blocked or the fan problem is intermittent then it is probably the climate output stage which has failed. This is located behind the glovebox by the center console.

A good article about fixing the climate control module can be found at http://www.macadamizer.com/bmwfix.html

Thanks

Sep 23, 2009 | 1996 BMW 318

1 Answer

Need to reset climate control unit on 1997 s500


hello,good day,you can reset your all electrical system by removing the negative cable,but be sure you have radio code,or you can go your dealer to scan your fault,using hht or star to that you know what system have fault even it is temporary,ty

Jun 27, 2009 | 1997 Mercedes-Benz Mercedes Benz S Class...

1 Answer

1999 Chrysler 300m ATC Control Communication Failure


i have the same car and it did the same thing when i got it take it to a dealership there are 2 flashes for the bcm body control module that will recalibrate the automatic temp contol and that should fix the problem

Apr 01, 2009 | 1999 Chrysler 300M

1 Answer

Climate contol does not light up.


Unfortunately the bulbs that light up your climate control are not replaceable and in order to get it to light back up again you need to replace the climate control unit.

Dec 01, 2008 | 2007 Chevrolet Silverado 1500 2WD

3 Answers

BMW 328i convertable climate control intermittant problem


I have a 318i and my climate control is faulty one sec it will be on then it shuts off then it may or may not come back on. and i noticed around the time that started happening my right blinker would start flicking erratically. just hoping for a little info.

Nov 28, 2008 | 1997 BMW 328

1 Answer

Car has dual climate control, however no heat is getting to the drivers side causing defrost issues. There is adequate airflow, but it is all cold even when set at full heat.


this is a vacume controled control panel, if a vacum line has come of one of the two climate contols that could cause you greef.

Sep 30, 2008 | Chevrolet Impala Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

910 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...