Question about 2000 Ford Windstar

Open Question

Right headlight on 2000 Windstar out, replaced bulb, fuse good,no power to light socket

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 31 Answers

SOURCE: 2000 ford windstar, directionals both not working, hazards work f

turn signal flasher module or turn signal switch. I usuall try to wiggle teh column switch or move it slowly up and down, back and forth to help determine if it has a bad contact. if i cant get a failure (or turn signal) that way I begin the testing at the base of the column. the flasher module is a common failure on those and isnt unreasonably priced. if i had no diagnostic procedure i would try that first. oh yea, try turning the hazards on and off rapidly several times. the signal goes through the four way switch.

Posted on Dec 31, 2008

Ad
  • 1 Answer

SOURCE: i have parking lights but no headlights i have

I have a 96' Explorer same problem . new headlight switch took care of it, was going bad. Dealer and most auto parts stores $55.00 or more, 32.50 at advance auto parts. Bone yard $35 bucks i remove. Hpe this helps. gl

Posted on Feb 28, 2009

jbass706
  • 167 Answers

SOURCE: 95 Ford windstar won't shift out of park when the

Sounds like the brake light switch on the brake pedal is bad. Try turning the key just off the locked position, shift into neutral and start the engine. If you turn the key to the to far to the on position the shift interlock engages and will only release when the brake lamp switch activates.

Posted on Oct 24, 2009

Testimonial: "Very helpful for the shifting part of the problem, but the brake lights still don't work."

harley9701ha
  • 424 Answers

SOURCE: I have a 1988 Ford Thunderbird Turbo Coupe. The

You have no power when the parking lamps are on. Do the front parking lamps work? If the front parking lamps work then you have an issue with the rear wiring. Use a test light to verify you do not have power at the sockets.

Posted on Nov 02, 2009

  • 5 Answers

SOURCE: 2000 focus. The brake lights are not working. The

short in harness.take to shop.or spend hours/days tracing wires to locate short.good luck.

Posted on Nov 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

1 Answer

Changed headlight bulb on 2003 ford windstar but still does not work. Could it be the socket?


Yes, with a test light it would be easy to check, ground the testlight and turn on headlights and probe the wires before the socket and see if theres power at one wire, and then hit highbeams and see if next wire has power then the last wire is ground, try wiggling the wires on the socket and see if the light comes on and if it does then its the socket, good day.

Apr 30, 2011 | 2003 Ford Windstar

1 Answer

I just recently purchased a 2000 Ford Windstar. The headlight on the passenger side will not work. I have replace the headlamp and the fuse to that part....still to no avail...no light. Could you help me...


If you bought your truck at a licensed dealership or used car lot, most states require that if the vehicle will not pass inspection, the seller must repair the vehicle at their expense. First check for corrosion in the headlamp bulb socket. Also check the headlight relay and for damaged wiring between the bulb, relay and fuse box.

Mar 11, 2011 | 2000 Ford Windstar

1 Answer

The right headlight for my 1999 ce corolla is not working but the side light is working and the full light is work


HEAD LIGHT BULB COULD BE BLOWED.REPLACE HEADLIGHT BULB STILL DONT WORK USE A 12 VOLT TESTLIGHT CHECK TO SEE IF HEADLIGHT BULB SOCKET GETTING POWER WITH LIGHT SWITCH ON POSITION HOOK TEST LIGHT WIRE TO A GOOD GROUND THEN PROBE POSITIVE SIDE OF HEADLIGHT BULB SOCKET.IF TEST LIGHT COME ON THEN MORE LIKELY BULB SOCKET WORN OUT NOT GETTING GOOD GROUND CONTACT INSIDE SOCKET OR GROUND WIRE LOOSE BROKEN.

Oct 31, 2010 | Toyota Corolla Cars & Trucks

1 Answer

Change headlights for ford windstar 2000


open hood.behind plastic headlight assembly,towards the corners,locate two square metal 'tabs' these are the 'handles' of the retaining brackets pry/pull straight out.remove bolt near grille opening.pull assembly forward to access lamp socket.turn socket counterclockwise,remove & replace bulb.do not touch glass of a halogen bulb,the oil from your fingers will cause a 'hot spot' & bulb may fail prematurely.clean 'touched' bulb w/ alcohol.

Sep 30, 2009 | 2000 Ford Windstar

1 Answer

Turn indicator light flashes quickly. bulbs fine


The quick flash is a fault detection for a burnt out bulb. If bulb is good, check bulb socket. Inspect for corrosion. If needed, replace bulb socket. Check bulb socket connector. Check if fuse. Check emergency flashers ( most cars have a separate circuit).

Jul 09, 2009 | 2000 Ford Windstar

1 Answer

RIGHT STOP LIGHT WORKS IRREGULARLY(2002 FORD WINDSTAR)


thereis three switches to check one is the muti function switch. the second is the headlight switch and third is the brake switch on the pedal.if not them check your ground and see if it is secured properly

Mar 07, 2009 | 2000 Ford Windstar

1 Answer

Right Indicator Light (Amber Color) not working


Check the inside of the light socket for corrosion and make sure the light bulb is making a good contact in the socket. Use a test light and make sure there is power going to the socket as well.

Jul 28, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...