Question about Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most volvo headrest can be removed by releasing the catches which are on the back of the headrest on some models and on the front on others I believe on 960 they are on the back. To release the seat on a 960 look where the shafts should be then follow it down on the back where the seat back top stops then goes in press around that area you should be able to find the catch there pull up on the headrest while releasing the catch you have to do this on both sides. The headrest should come off this also works on 740 and 760 series the volvo 780 is a different story the only way to get the headrest off on that is to disassemble the seat
Posted on Mar 14, 2009
SOURCE: third row seats
A little plastic bumper, located on a metal tab on the inside of the bottom seat cushions breaks off. It is supposed to hit the seat back release and allow the back to fold down when you push the bottom cusion in all the way. I finally just bent the metal tab up so it would hit the release and that fixed it. (Look for the broken palstic pieces under the seat cusion area as an indication) The dealer replaced the plastic part several times... a waste of time.
Posted on Mar 24, 2009
There is a small hole at the base of the headrest post. Use a nail and push in the hole to release them.
Posted on May 31, 2009
I drive a 2008 Suburban LT and my company has a true work "fleet" suburban. The only difference between these two that I have is the back of the fleet vehicle has a thick rubber mat in the back with no seats. After removing the black mat I found that the channels and rods that the rear seats clip into are present. The third row seats are installed by clipping them in no bolts or tools are required.
Posted on Aug 07, 2009
my third seat is stuck in the down position . press switch to raise i hear the motor but nothing happens. 2006 ford explorer
Posted on Jan 17, 2010
Tips for a great answer:
May 24, 2017 | 2003 Ford Expedition
Dec 11, 2013 | Cars & Trucks
Nov 26, 2012 | 2002 Toyota Sequoia
Apr 04, 2012 | 2005 Lincoln Navigator
Aug 21, 2011 | Ford Expedition Cars & Trucks
Mar 06, 2011 | 1998 Ford Explorer
Aug 10, 2010 | 2001 Ford Excursion
217 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: