Question about 2003 Ford F250 Super Duty Crew Cab

3 Answers

03 ford f 250 super duty 6.0 brake problem

Over the last week my wife noticed the brakes getting softer. Eventually the brakes went to the floor and would not work. Someone drove the truck home for her and said the brakes would work sometimes and sometimes not at all. The master cylinder is full and there are no brake fluid leaks anywhere on the truck. Where do i start??

Posted by on

  • Anonymous Mar 17, 2014

    smell of brakes and brake fluid metal to metal sometimes

  • Anonymous Mar 25, 2014

    Master cylinder leaks brake fluid at the pressure sensor.

×

3 Answers

So if it is an ABS problem i will have to bring it to the dealer, correct?

Posted on Oct 26, 2008

So if the problem goes away upon removing the fuse, do i need to bring it to the Ford dealer and let them go from there?

Posted on Oct 26, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

If you are getting an intermittent soft pedal you may have a problem with the abs or master cylinder. try unplugging the fuse for the abs and see if the problem goes away. (FYI if you do this your abs light will come on and you will have no abs function until you reinstall the fuse)

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instrument panel brake light stays on what does it mean


The brake warning light is for the hydraulic system.
It could be low on fluid or several other things. There may also be a warning light for a dead brake or tail light.

Jun 30, 2012 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

My 2005 f-250 abs sensor on front wheel went bad is this a tough fix


not to bad, you need to pull off the brake caliper and brake rotor and then you will need a small hex wrench to take the sensor out of the hub

Mar 22, 2011 | 2005 Ford F 250 Super Duty

1 Answer

03 f250 super duty wont come out of park


Do the brake lights work? If you no power from the brake light switch you won't be able to move the shifter

Jun 27, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Brake fade on a 1988 ford E350 motorhome


You might want to google recalls on the internet.
( http://www.recalls.gov/nhtsa.html )

I remember one such on that or the F-53 chassis.

Jun 02, 2010 | 2007 Ford E-350 Super Duty Length XLT

1 Answer

Got a 250 supper duty looking for elertic brake controler harness.found a bundle of wires by emergency brake but no 4 prong gray plug.but a lot of wiers with no ends.


it under the dash to the right hand side. must remove lower dash panel to acess. and i think its a 6 pin harness your lookin for in the ford.

Feb 24, 2010 | 2007 Ford F-250 Super Duty Lariat

1 Answer

Brake light dont work 08 ford f350 fuses good were is the relay thank you


this should be under warrenty take itto Ford and get it fixed for free, otherwise check the brake switch on the brake pedal.

Jun 25, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Uneven wear on new brake pads


sounds like the caliper slides are frozen /also make sure you have the right pads for the application

Dec 09, 2008 | 2003 Ford F250 Super Duty Crew Cab

Not finding what you are looking for?
2003 Ford F250 Super Duty Crew Cab Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...