Question about 2004 Honda CR-V
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Welcome to FixYa.com
Thank you for using FixYa.com, Regards, Lee Davidian Remove upper radiator hose
Remove the two 8 mm bolts See diagram below
Welcome to FixYa.com
Posted on Sep 16, 2010
SOURCE: PCV valve for 2004 Hona CRV
PCV Valve Operation:
A vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed, and acts as a system shutoff in case of engine backfire to prevent an explosion in the crankcase.
Depending on your engine size, the PCV is a different style and slightly different location.
Usually they are mounted in a hole on your valve cover.... connected by a vacuum tube.
Some are mounted with threads into the engine block (usually by the oil filter)
On the '04 Crv - it is nearly inaccessible behind the AC compressor and beneath what looks like an old vacuum advance. Most PCV valves today do not need to be replaced, unless there is actual valve failure, which I have not seen happen. I would not be concerned about replacing it.
Thanks for using FixYa - a FixYa rating is appreciated!!
Posted on Feb 21, 2009
the check engine lamp is not affected by things like tyres, brakes etc. It shows that the vehicles engine management system had detected a fault with the engine or engine sensors. Check the engine for broken or disconnected wiring (maybe it was disconnected during the replacing of the hoses but not reconnected). If you fail to locate anything, check the manual for the correct fault code retrieval procedure or take the vehicle to a professional. Tyres may affect your ABS system or Airbag systems but they usually have their own warning lamp and are unrelated to the check engine lamp..
Posted on Dec 15, 2009
it should be located right outside the engine block. follow the black rubber hose going from the radiator to the engine. the peice it connects to on the engine should be where it is. if you buy a hanes repair manual from autozone for your car it will walk you through it
Posted on Mar 20, 2010
JUST POP SWITCH OUT AND BULB GOES INTO SWITCH USE SMALL SCREW DRIVER TO REMOVE YOU WILL HAVE TO TWIST IT COUNTERCLOCKWISE TO REMOVE, TWIST CLOCKWISE TO INSTALL.
Posted on Apr 21, 2010
Tips for a great answer:
on May 10, 2012 | 2004 Honda CR-V
Apr 06, 2014 | 2004 Honda CR-V
Jul 17, 2010 | 2004 Honda CR-V
Jan 28, 2010 | 1998 Honda CR-V
Dec 15, 2009 | Honda CR-V Cars & Trucks
Nov 17, 2017 | 2004 Honda CR-V
Mar 07, 2017 | 2004 Honda CR-V
705 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: