Question about 1999 Chevrolet Silverado 1500

Open Question

1998 dodge ram 2500HD rear axle seal

Right side seal needs replacement

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Rear Axle Removal

if you are talking about the axle seals, 1.REMOVE THE WHEELS.2. REMOVE THE DIFF COVER(slowly)3.REMOVE THE BRAKE CALIPER ASSEMBLY.4.REMOVE THE 8MM PIN IN THE DIFF CARRIER. 5.TURN CARRIER AND REMOVE THE LARGE PIN.6. FIRMLY HIT IN THE AXLE, A SMALL RETAINING C CLIP WILL FALL INTO THE DIFF HOUSING. DO THE SAME WITH THE OTHER SIDE. ( be careful if you have rear speed sensors remove it when you remove the brake calipers . you will break it when you are pushing in the axles.)7.pull axles and replace seals

Posted on May 30, 2008

Ad
raineystorm
  • 23 Answers

SOURCE: instructions on replacing rear axle end oil seals 90 silverado pu

Where's it leakin?

Posted on May 12, 2009

  • 20 Answers

SOURCE: how to replace a right rear axle seal in a 2001

you must remove all brake parts then you get to the axle easy to do with the right tools

Posted on Jul 22, 2009

ftw1952
  • 10319 Answers

SOURCE: how do I remove the rear axle pin to replace the

the rear center cover must be removed to remove the axle pins. Once the cover is out you can see the houseshoe pins easily

Posted on Jan 10, 2010

  • 14036 Answers

SOURCE: how to remove rear axle to replace axle seal?

YOU NEED A HAYNES OR CHILTON REPAIR MANUAL.TO REMOVE REAR AXLE YOU HAVE TO REMOVE REAR DIFFERENTIAL COVER AND GASKET.YOUR DIFFERENTIAL HAS EITHER PINION SHAFT LOCKING SCREWS OR C - LOCKS.THEY HAVE TO REMOVED BEFORE AXLE SHAFT WILL COME OUT.

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of a 2001 dodge ram 1500 four wheel drive front axle


Search Results
    images for I need a diagram of a 2001 dodge 1500

    Replace front axle seals 1998 Dodge Ram 4X4, part 1 ...

    ? 14:28
    https://www.youtube.com/watch?v=WvRyg95cUIQ
    Nov 1, 2010 - Uploaded by spelunkerd
    If you have gear oil leaking from a front axle tube then this is a ...a circular hole saw (he says about 2-2 1/4"), grinding the teeth down, ... Hey my 2001 ram has a big puddle coming from it'sdriver side wheel could this be it?.

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

JUST HAD RIGHT FRONT WHEEL BEARING REPLACED ON MY 1998 DODGE RAM 1500 4X4 DROVE 50 MILES NOW THE AXLE SEAL IS LEAKING WHY


Can't remember if your axle is set up like the ones on a Jeep (too many cars stuck in my head) but if it is, the seal is on the inboard end of the axle and easy to forget it's there. If you don't lift the axle so it goes through the center of the seal when you put it back in, it will push the seal out and cause a leak.
If that's the case, whoever did the work needs to make it right. (carrier needs to be removed as well as the axle, to replace the seal)

May 24, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

Hello, the rear axel seal on my Dodge Ram Dually


is not that bad just take the tires off then take the diff cover off take the drum or disc off on some truck there is four bolts on the end of the axle tube that you have to remove to get the axle out. but, if you look insider the diff and see two clips that look like a c ust take the bar that runs threw the middle of the diff and holds the spider gears inplace and keeps the axle from moving back and forth out and push the axles in and remove the clips then pull the axle out and rip the sear out and install the new one.

Jul 02, 2010 | 1998 Dodge Ram 3500 2WD

1 Answer

Will I need any speacial tools to replace the rear


You should be able to do it with regular Metric wrenches and sockets.

May 22, 2010 | 2003 Chevrolet Silverado 2500HD

1 Answer

98 dodge ram 1500 rear axle, setting the backlash


there are adjusters on each side of carrier. do most of adjusting from driver side.need about 8 thou of backlash

Jul 27, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

1999 dodge cummins 2500 front axel seals


you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

Jun 09, 2009 | 2004 Dodge Ram 2500

2 Answers

Had u joint repair on 98 dodge ram 1500 v8 now have trans leak?


I just replaced my front ujoint for the 2nd time and yes when you pull the outer axle to replace the u joint and then reinstall the axle it seems to dislodge or screw up the seal. the 1st time i had a shop do it and they fixed the seal but now its on me

May 26, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Axle Seals


book time is a little over 6 hours to do both. if its your first time count on it taking a lot longer

May 18, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...