Question about Cars & Trucks

Open Question

Starcraft bus power door won't close

S power door won't close

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: Driver's door won't open inside

Hey, You need to remove the panel otherwise u can't reattach the metal sticks that move the locks, but i think it's hard to remove it in a closed posision when u don't brake it

Posted on May 16, 2011

  • 3911 Answers

SOURCE: The Driver's side door of

first make sure the bolts which hold the latch mechanism to the door are firmly screwed in. if that ain't it, remove the post which it clamps onto from the door jamb and switch it with one from a back door. close the back door firmly, lock it and never use it again. if that ain't it go to www.getsaturnparts.com and buy yourself a new door latch mechanism and pay an auto glass shop to put it in for you.

Posted on Sep 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse location for 12VDC Power outlets


check as the other fuse should be in close area

Mar 23, 2015 | Ford Cars & Trucks

2 Answers

Hi I have a 2006 Lincoln navigator the air suspension pump will not turn on the vehicle dynamics module is not turning on the pump relay because in the pid data the drivers door says it is ajar when it is...


Hey Jeff, any U- codes stored in any modules ?
U1900 Missing CAN message(s) Door(s) ajar, PRNDL, 4x4, instrument cluster (IC), running boards, vehicle speed REFER to Section 418-00 . U2023 Invalid CAN message(s) Door(s) ajar, PRNDL, 4x4, instrument cluster (IC), running boards, vehicle speed REFER to Section 418-00 .
L4 CHECK THE VDM FOR DOOR AJAR INPUT
  • Key in ON position.
  • Monitor VDM door position status PID.
  • Close all doors, liftgate, liftgate glass and power running boards.
  • While observing the diagnostic tool, open and close one door.
  • Does the door status PID change between CLOSED and AJAR states?
When you open an close the driver door you have no PID change ,right ?
L4 CHECK THE VDM FOR DOOR AJAR INPUT
  • Key in ON position.
  • Monitor VDM door position status PID.
  • Close all doors, liftgate, liftgate glass and power running boards.
  • While observing the diagnostic tool, open and close one door.
  • Does the door status PID change between CLOSED and AJAR states?
The door ajar input is an input to the Vehicle Security Module , then transmitted over the bus ! You'll have to find a diagram for the med. speed CAN data bus .

Jan 09, 2015 | 2006 Lincoln Navigator

1 Answer

1987 Oldsmobile Sierra door won't close...like


Sounds like the door latch is stuck or broken.
There is a gear in the side of the latch that turns when it hits the striker bolt on the door frame.
You can try taking a screwdriver and pushing on the gear to see if it will move. You can look at one of the other doors to see how it is supposed to work.

Apr 15, 2013 | Cars & Trucks

1 Answer

The door mechanism is stuck in the closed position and the door won't close


Push in the door button. While pushing in the button, take a screwdriver and pry up on the door mechanism on the end of the door. Should unlock and allow the door to shut again.

Feb 18, 2013 | 1999 Chevrolet Lumina

1 Answer

My Lexus RX 330 back power door won't stay open, it keeps closing.


check the switch at the door and the on the inside

Sep 26, 2012 | 2005 Lexus RX330

1 Answer

Rear passenger door won't stay closed


Door latch on door itself is in closed position if it will not close at all. In this case, open door and pull outside handle hard to pop open door latch. If you have door opening at random, door latch needs replacing or door catch on body is loose.

Jul 29, 2012 | 2003 Chevrolet TrailBlazer

1 Answer

I have a 2000 pontiac sunfire an the radio seems to stay on even when the car us turned completely off. What does that mean because it keeps killing my battery.?!


The most likely answer is that your vehicle's door pin switches aren't working. When you open the driver's door, does your dome light turn on? Your radio works with the vehicle's data bus to stay on until the door is opened; if the system can't tell that the door has been opened, then it won't turn off. The door pin switch should be mounted at the front of the door opening.

Aug 16, 2011 | 2000 Pontiac Sunfire

1 Answer

Driver's door won't open inside or out. Power locks work but inside and outside handles dont release latch. Can I get door panel off in the closed position, otherwise any way to open door


Hey, You need to remove the panel otherwise u can't reattach the metal sticks that move the locks, but i think it's hard to remove it in a closed posision when u don't brake it

May 16, 2011 | Saturn Vue Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...